SEER Robotics Robotic Automatic Charging Station (SCS-C4860)

A mobile robot that works a full shift but waits for a person to plug it in is only half automated. The SEER Robotics Robotic Automatic Charging Station (SCS-C4860) closes that gap: it is a charging station built for the 48 V Small AMR series, so the robot's battery can be topped up at a dedicated point instead of by hand, and the fleet keeps moving.

The product is available through this page, by quotation.

Background

SEER Robotics and its lineage

SEER Robotics (06106.HK) is a platform-based embodied intelligent robotics company built around the Robot Brain. It serves more than 2,500 customers worldwide with intelligent robotics solutions. A company of that kind does not treat charging as an afterthought: a robot platform is only as useful as the hours it can stay in service, and a charging station is part of that platform.

The SCS-C4860 belongs to the family of robotic automatic charging stations that SEER Robotics offers alongside its autonomous mobile robots. Within that family, the station is matched to a particular class of vehicle, which makes selection simpler than it is with generic chargers. You can browse the wider range in the Charging Stations category.

Positioning and key technology

The station suits the 48 V Small AMR series. It delivers an output of 48 V / 60 A, reaches a maximum power of 3 kW, and charges to 100% in 60 minutes. It adapts to various lithium batteries, which matters for integrators who work with more than one battery supplier.

Safety is built in through 6 kinds of protection: overvoltage, overcurrent, reverse connection, short circuit, leakage and over temperature. Status is visible remotely through Roboshop, which supports remote status viewing, remote control and real-time monitoring of the overall machine status. In short, the SCS-C4860 is a compact, networked power point for small AMRs, not simply a box that supplies current. Facilities that run factory robots will recognize the value of that combination.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published what is in the box, the cable length, the certifications, the efficiency, the noise level or the mounting method; they are confirmed at quotation.

What protects the battery and the robot while the SCS-C4860 charges?

Charging is the moment when a battery system is under the most electrical stress, so protection counts as much as speed. The SCS-C4860 carries 6 kinds of safety protection. Overvoltage and overcurrent protection guard against the supply exceeding what the battery should accept. Reverse connection protection covers wiring or contact errors. Short circuit and leakage protection address faults in the charging path, and over temperature protection responds to heat.

For a facility manager, this list is useful because it covers both electrical faults and thermal conditions. Together with the 0℃ to 40℃ working temperature, it helps you judge whether the station suits your floor, whether that is a climate-controlled warehouse or a busier production hall. Its reference standard is EN 62477-1. Please raise any certification question when you request your quotation.

How does the SCS-C4860 connect to your network and your fleet?

The station supports Wi-Fi, which is the recommended option, as well as wired and 5G connections. That gives integrators room to choose: Wi-Fi is the simplest where coverage is good, a wired link suits a fixed station where you want a stable connection, and 5G is there where a site is built around cellular networking.

Once connected, Roboshop supports remote status viewing, remote control and real-time monitoring of the overall machine status. In practice this means an operator can check a station without walking to it, which is a real convenience across a large site or several buildings. Bear in mind that the station is only one part of the system: the robots, the network and the software must all be planned together.

Who is the SCS-C4860 for?

The first group is operators of 48 V Small AMR series robots. The station is suitable for that series, so this is the natural fit, and the output of 48 V / 60 A matches that class of vehicle.

The second group is system integrators who deploy robots for customers and need a charging point that works with various lithium batteries and can be monitored remotely. The third is warehouse and logistics teams who want charging to happen without staff stepping in at each shift change. The fourth is robot builders and research teams working on small platforms who need a defined, documented power supply.

If your fleet runs on another battery system, or you need a different output class, compare the other stations in the range before you decide. The SCS-C4850D, the SCS-C48100D and the SCS-C24100D are part of the same range, and our team can help you choose the right model at quotation.

What is the SCS-C4860 used for?

1. Recharging small AMRs: the station supplies 48 V / 60 A to the 48 V Small AMR series.
2. Fast turnaround between tasks: a charge to 100% takes 60 minutes, so vehicles return to work quickly.
3. Mixed lithium battery fleets: the station adapts to various lithium batteries, which helps where battery types differ.
4. Remote station supervision: Roboshop gives remote status viewing, remote control and real-time monitoring.
5. Networked deployments: Wi-Fi, wired and 5G connections let the station fit different site designs.
6. Safer unattended charging: 6 kinds of protection reduce the risk during charging when no one is nearby.

Pricing and Availability

We do not show prices for this station. Quotation is the next step: send us your requirements, including your robot model, site conditions and quantity, and we will respond with a quotation. Delivery, customs and support are arranged with the quotation. The SEER Robotics Robotic Automatic Charging Station (SCS-C4860) is available on this page.

Frequently Asked Questions

Which robots is the SCS-C4860 designed for?

It suits the 48 V Small AMR series. Please confirm your exact robot model with us when you request a quotation.

How long does a full charge take?

The station charges to 100% in 60 minutes, with an output of 48 V / 60 A and a maximum power of 3 kW.

What input power does it accept?

It accepts 110 V to 120 V or 220 V to 240 V AC at 50 / 60 Hz. The DC output voltage range is 32 V to 60 V.

What safety protections are included?

There are 6 kinds: overvoltage, overcurrent, reverse connection, short circuit, leakage and over temperature protection.

How is the station monitored?

Roboshop supports remote status viewing, remote control and real-time monitoring of the overall machine status. The station connects by Wi-Fi (recommended), wired or 5G.

What are the size and operating temperature?

The dimensions are 452 x 485 x 385 mm (L x W x H), and the working temperature is 0℃ to 40℃.

Where can I buy the SCS-C4860 and what does it cost?

You can request it through this page, by quotation. We do not show a price here; the quotation covers your configuration and quantity.

Summary

A robot is only as autonomous as its charging routine. The SCS-C4860 gives the 48 V Small AMR series a dedicated charging point with an output of 48 V / 60 A, a charge to 100% in 60 minutes, 6 kinds of protection and remote monitoring through Roboshop. Wi-Fi, wired and 5G connections let it fit a range of sites. If it matches your fleet, this page is the starting point.