OrionStar CleaniBot C5 Commercial Cleaning / Scrubbing Robot

A warehouse floor does not stay clean for long, and a crew with a ride-on machine cannot be everywhere at once. The OrionStar CleaniBot C5 Commercial Cleaning / Scrubbing Robot takes on that job in large, busy venues. It scrubs on its own, returns to its dock on its own and goes back out again, so the floor keeps getting attention while your staff do other work.

The product is available through this page, by quotation.

Background

The company behind the C5

The manufacturer listed for the C5 is Beijing OrionStar technology co., Ltd. The company builds service robots for commercial spaces, and the CleaniBot line is its answer to the daily work of keeping floors clean in places where people and goods are constantly moving. This page keeps to the maker, the product and its figures.

Where the C5 sits in the range

The C5 is a high-performance cleaning robot for medium-to-large environments. It is the industrial-grade cleaning flagship for warehouses, malls and transportation hubs. The design is built around dock-and-go automation. A dedicated workstation handles clean-water refilling, wastewater discharge and high-pressure rinsing of the internal tank. The robot's job is to scrub, and the station's job is to look after the robot.

Two features stand out. A Dual-Rolling Brush system cleans heavy oil and stubborn stains in a single pass, with a debris removal efficiency above 95%. A "Cloud Learning" function optimizes paths automatically to find the most efficient route. For buyers who want to compare it with other machines, our Cleaning Robots category shows the wider range.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the IP rating, the navigation sensors, the service interval, the brush lifespan, the certifications or the packaged contents; they are confirmed at quotation.

What makes the CleaniBot C5 different from a typical commercial cleaner?

Many cleaning robots are sized for offices, corridors and small shops. The C5 is sized for the opposite end of the market. Its 90L water tank system and 25kg of downward scrubbing pressure are aimed at floors where oil, grime and dried-on dirt are a normal part of the day. Its 550 mm washing width and 1980 m²/h cleaning efficiency show that it covers long distances, not just small rooms.

The second difference is how the machine spends its time. The C5 supports 1.5-hour fast charging, and the large tank reduces downtime between refills. A battery of 24V and 80 Ah gives 3 hours of continuous scrubbing or 8 hours of dust-mopping. That gap tells you something useful: the machine works much longer in light dusting duty than in full wet scrubbing, so you can plan the day around the mode you need.

The third difference is durability. The C5 is built with a 10,000+ hour fan and a dual-redundancy safety architecture for stable long-term performance.

How does the docking workstation keep the C5 working?

A scrubber that needs a person to fill and empty it is only half automated. The C5's workstation takes over those chores: it refills clean water, discharges wastewater and rinses the internal tank at high pressure. The station carries its own 8 L water tank. Buyers who cannot change their building's plumbing can look at the optional Mobile Water Tank, which needs no plumbing modification and is easy to deploy.

The robot can also map expanses of up to 10,000 m², and it passes through corridors as narrow as 880 mm. Noise stays below 68 dB(A), which matters in malls and transport hubs where the machine works near the public. Wi-Fi, 4G and Lora connectivity are the network options.

Who is the OrionStar CleaniBot C5 for?

The C5 suits operators who have large floors and not enough hours. Warehouse managers get a machine for oil stains and grime. Mall operators get a quiet scrubber that can work among shoppers. Facility teams at airports, rail stations and other transportation hubs get a unit that can map a large area and follow efficient routes. Cleaning contractors who serve such sites will value the fast charging and the automated dock cycle, because those features shorten the time the machine spends idle.

It is less suited to small rooms or tight, cluttered spaces, because the robot measures 820 × 680 × 1,130 mm, weighs 170 kg and needs an 880 mm passing width. If your site is smaller, our Cleaning Robots category lists other options.

What is the OrionStar CleaniBot C5 used for?

1. Warehouse floor scrubbing. Removes oil stains and grime across wide aisles and open areas.
2. Mall maintenance. Cleans large public concourses at a noise level below 68 dB(A).
3. Transportation hub cleaning. Covers terminals and halls where foot traffic is heavy and floors need daily attention.
4. Dust mopping. Runs up to 8 hours in dust-mopping mode for lighter daily upkeep.
5. Water absorption. Picks up water from the floor as part of its cleaning cycle.
6. Automated station cycles. Refills, drains and rinses at the workstation so the robot returns to work with little human help.

Pricing and Availability

The C5 is sold by quotation, and we do not print prices on this page. Send us your site details, and we will prepare a quotation for your project. Delivery, customs and support are arranged with the quotation. The OrionStar CleaniBot C5 Commercial Cleaning / Scrubbing Robot is available on this page.

Frequently Asked Questions

How large an area can the C5 clean?

Its maximum cleaning efficiency is 1980 m²/h, and it can map expanses of up to 10,000 m².

How long does it run on a charge?

The 24V, 80 Ah battery provides 3 hours of continuous scrubbing or 8 hours of dust-mopping. Fast charging takes 1.5 hours.

Does it need a person to fill and empty the water?

No. The workstation refills clean water, discharges wastewater and rinses the internal tank at high pressure.

Can it work where plumbing cannot be changed?

An optional Mobile Water Tank is available, and it requires no plumbing modification.

Is it loud?

The noise level is below 68 dB(A), which keeps it unobtrusive around public crowds.

Which cleaning modes does it offer?

The C5 offers Scrubbing, Dust Mopping and Water absorption modes.

Where can I buy the OrionStar CleaniBot C5 and what does it cost?

You can buy it through this page by requesting a quotation. We do not list prices here, and the cost is given in the quotation for your project.

Summary

Large floors need a machine that keeps working when people go home or look elsewhere. The OrionStar CleaniBot C5 pairs a 90L water tank system, 25kg of downward scrubbing pressure and a 550 mm washing width with a docking workstation that handles the chores. It is built for warehouses, malls and transportation hubs, and it suits operators who want the floor cleaned without a person on the machine. If that matches your site, this page is the starting point.