SEER Robotics 2000 Kg Counterbalanced Autonomous Forklift (SFL-CPD20-Y)

Most warehouses were built around people, not around machines that drive themselves. The SEER Robotics 2000 Kg Counterbalanced Autonomous Forklift (SFL-CPD20-Y) takes a different approach: it keeps the familiar counterbalanced layout that operators already know and adds a laser SLAM brain, so the truck finds its own way to the pallet and back.

This product is available through this page, by quotation.

Background

The company behind the forklift

SEER Robotics (06106.HK) is a platform-based embodied intelligent robotics company built around the Robot Brain. It serves more than 2,500 customers worldwide with intelligent robotics solutions. That customer base matters to a buyer in the Caribbean, because it means the control approach used in this forklift is shared across a wide family of machines rather than built for a single model.

The same family includes pallet trucks, stackers and other counterbalanced trucks. If you are comparing the range, the Counterbalanced Forklifts category shows the neighbors of this model side by side.

Positioning and key technology

The SFL-CPD20-Y is a Laser SLAM counterbalanced autonomous forklift. Laser SLAM means the truck builds a map of the site with laser scanning and locates itself on that map as it moves. It carries one SLM-SLE4248 lidar and three SLD40 lidars, giving it several viewpoints around the vehicle.

It handles both open and closed pallets, and it runs by automatic navigation or by a manual control device. A counterbalanced design carries the load ahead of the front axle and does not need straddle legs, which is why this style of truck is common for loading docks, production lines and floor-level stacking.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the ingress protection rating, the power consumption, the safety certifications, the network and communication interfaces or the supported fleet management software; they are confirmed at quotation.

What makes the SFL-CPD20-Y different from an autonomous pallet truck?

A pallet truck moves loads along the floor and stops there. This forklift lifts to a standard height of 3000 mm, so it can place pallets onto racking or stack them, which a low-lift truck cannot do. If your work ends at floor level, a model such as the SEER Robotics Autonomous Pallet Truck (SFL-CBD20) may be the simpler choice.

The counterbalanced layout also means the forks reach out in front of the body, with the weight of the truck behind them balancing the pallet. The rated load capacity is 2000 kg at a 500 mm load center distance, and the truck itself weighs 3130 kg with its battery. Buyers should check that their floors can take that combined weight.

The forks measure 1070 x 122 x 40 mm, and their outer width adjusts from 400 mm to 700 mm. That range suits different pallet footprints. Fork width, robot height, color and logo can also be customized, which helps when a site has an unusual pallet or a low doorway.

How does the SFL-CPD20-Y find its way and stack safely?

Navigation relies on laser SLAM, with a position accuracy of ±10 mm and an angle accuracy of ±1°. Those figures matter when a fork has to enter a pallet opening or a rack bay with little room to spare. Four lidars, one SLM-SLE4248 and three SLD40, give the truck its view of the surroundings.

At the point of stacking, ultrasonic technology detects the separation status between goods and forks in real time, ensuring safe and secure stacking. On the move, the truck travels at 1.5 m/s, full load or no load. Braking distance is ≤30 cm from 1 m/s and ≤50 cm from 1.5 m/s.

The minimum turning radius is 1597 mm, so aisle planning should allow for that. Passability is ≤5% for slopes, 10 mm for steps and 30 mm for gaps, which describes how much floor irregularity the truck can cross, such as a dock plate seam or a floor joint.

Who is the SFL-CPD20-Y for?

Operations managers who move pallets on repeated routes are the natural audience: production feeds, finished-goods transfers, dock-to-rack runs and similar loops. Food and beverage distributors, packaging plants, bottlers and regional warehouses across the Caribbean all handle the kind of 2000 kg pallet loads this truck is rated for.

It also suits teams that want to automate without losing the option of manual control, since the truck can run by automatic navigation or by a manual control device. Sites that operate on several shifts will look at the battery: 24 V / 200 Ah lithium iron phosphate, 6 to 8 h of comprehensive battery life, and 2 h to charge from 10% to 80%. The battery can be replaced in 2 minutes.

Buyers whose pallets are heavier should look at the SEER Robotics 3000 Kg Counterbalanced Autonomous Forklift (SFL-CPD30-Y). Those with lighter loads may prefer the SEER Robotics 1400 Kg Autonomous Counterbalance Truck (SCB-1400). For wider plant automation projects, the Factory Robots category shows what else sits alongside this forklift.

Note the operating environment: 0℃ to 50℃ and relative humidity of 10% to 90%, with no compression and no condensation. That suits indoor warehouses and plants, and buyers should check their own site conditions against it.

What is the SFL-CPD20-Y used for?

1. Pallet transfer between stations. It carries open or closed pallets along fixed routes between production, buffer and dispatch areas.
2. Racking and stacking. The 3000 mm standard lifting height lets it put pallets up and take them down.
3. Loading and unloading zones. The counterbalanced body and adjustable forks suit handovers at dock-side staging areas.
4. Production line feeding. Repeatable trips keep raw materials and components arriving where lines expect them.
5. Multi-shift material flow. A 2-minute battery swap and 2 h charging from 10% to 80% support continuous shifts.
6. Mixed manual and automatic work. A manual control device lets staff take control when a task calls for it.

Pricing and Availability

We do not list prices for this forklift. Every project differs in fork width, height, color, logo and site layout, so we prepare a quotation for each. Delivery, customs and support are arranged with the quotation. The SEER Robotics SFL-CPD20-Y is available on this page.

Frequently Asked Questions

What load can the SFL-CPD20-Y carry?

The rated load capacity is 2000 kg, at a load center distance of 500 mm. The standard lifting height is 3000 mm.

How long does the battery last and how fast does it charge?

Comprehensive battery life is 6 to 8 h on the 24 V / 200 Ah lithium iron phosphate battery. Charging from 10% to 80% takes 2 h, by manual or automatic charging.

Can the battery be swapped quickly?

Yes. The battery can be replaced in 2 minutes, even by a beginner.

What pallets does it handle?

It handles open pallets and closed pallets. Fork outer width adjusts from 400 mm to 700 mm.

Can the forklift be customized?

Fork width, robot height, color and logo can be customized. Please state your requirements when you request a quotation.

How accurately does it position itself?

Navigation position accuracy is ±10 mm and navigation angle accuracy is ±1°. Laser SLAM with four lidars provides the navigation.

Where can I buy the SFL-CPD20-Y and what does it cost?

You can request it through this page, by quotation. We do not list a price here; the quotation sets out the scope, delivery, customs and support for your site.

Summary

The SFL-CPD20-Y keeps the counterbalanced truck that warehouse teams know and replaces the driver with laser SLAM navigation, four lidars and ultrasonic stacking detection. It lifts 2000 kg to 3000 mm, positions to ±10 mm, and runs 6 to 8 h on a battery that swaps in 2 minutes. If this fits your floor and your pallets, this page is the starting point.