SEER Robotics Autonomous Pallet Truck (SFL-CBD20)

A pallet that waits for a driver is a pallet that costs time. The SEER Robotics Autonomous Pallet Truck (SFL-CBD20) takes the driver out of that picture: it finds its own way through the building with laser SLAM, lifts an open pallet and sets it down where the workflow needs it, shift after shift.

This product is available through this page, by quotation.

Background

The company behind the truck

SEER Robotics is listed in Hong Kong under the code 06106.HK. It is a platform-based embodied intelligent robotics company built around the Robot Brain, and it serves more than 2,500 customers worldwide with intelligent robotics solutions. That customer base matters to a buyer in practical terms: a pallet truck is only as useful as the software that steers it, and software of this kind improves when it is used in many different buildings.

The SFL-CBD20 belongs to the pallet truck family. Three related versions exist, the SFL-CBD15, the SFL-CBD15-CE and the SFL-CBD30, so the model number tells you where in the range this truck sits.

Laser SLAM as the key technology

The SFL-CBD20 is a Laser SLAM Autonomous Pallet Truck. SLAM stands for simultaneous localization and mapping: the robot builds a map of its surroundings with lidar and locates itself on that map as it moves, so it does not depend on tape or wires laid into the floor. The truck supports three navigation methods, SLAM, reflector and NFL, which lets the same machine suit different kinds of sites and business scenarios.

For sensing, the truck carries three lidar units: one SLM-SLE4248 and two SLD40. Navigation position accuracy is ±10 mm and navigation angle accuracy is ±1°, which is the kind of repeatability a pallet drop at a rack or a station calls for.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the payload tolerance, the IP rating, the noise level, the Wi-Fi standard, the product weight without battery or the included accessories; they are confirmed at quotation.

What makes the SFL-CBD20 different from a manual pallet truck?

A manual or driver-operated truck is as good as the person on it, and it stands idle at breaks and shift changes. The SFL-CBD20 carries a rated load of 2000 kg at a load centre of 600 mm and moves at 1.5 m/s when fully loaded, rising to 1.66 m/s when empty. It repeats the same route with the same positioning accuracy every time, and with a comprehensive battery life of 10 h it can cover a long working period before it needs a charge.

Charging is also built around the work. The battery is 51.2 V / 106 Ah, and charging from 10% to 80% takes 2 to 3 h. The truck supports both manual and automatic charging, so a site can begin with a plug and move to automatic docking when the workflow is settled.

How does the truck stay safe around people?

The truck has four layers of safety protection: a 3D obstacle avoidance laser, a safety edge sensor, a distance sensor and hardware self-inspection. Each layer covers a different failure: the laser sees obstacles in three dimensions, the edge sensor reacts to contact, the distance sensor watches the gap ahead, and the self-inspection checks the hardware itself. Together they suit a floor where forklifts, walkers and robots share the same aisles.

The body is compact for a 2000 kg machine. At 1720 x 960 x 2090 mm and a minimum turning radius of 1360 mm, it can work in aisles where a larger vehicle would struggle. The standard lifting height of 205±5 mm is a pallet-transport lift, meant for moving loads along the floor rather than stacking them high.

Who is the SFL-CBD20 for?

The truck suits warehouse and factory operators who move open pallets over repeated routes: between goods receiving and storage, from a production line to a staging area, or from a packing station to dispatch. It is a good match where the operating environment stays within 0℃ to 50℃ and 10% to 90% relative humidity, without condensation.

Distribution centers, manufacturers and logistics providers in the Caribbean that want to lift labor out of repetitive pallet movement will find a clear fit here. Buyers whose loads are heavier should look at the SEER Robotics 3 Ton Autonomous Pallet Truck (SFL-CBD30). Those comparing other machines in the range can browse the Pallet Trucks category, or see the wider Factory Robots selection for other plant automation.

This truck handles open pallets only, so a site that works mainly with other load carriers should keep that in mind.

What is the SFL-CBD20 used for?

1. Goods-in to storage. Moves received pallets from the dock to their storage location without a driver.
2. Line-side supply. Brings material pallets to production lines on a fixed schedule.
3. Finished goods transfer. Carries completed pallets from the end of the line to staging or dispatch.
4. Inter-building shuttles. Repeats a set route between warehouse zones or neighboring buildings.
5. Shift-spanning transport. Keeps pallets moving through the long working day with the 10 h battery life and charging between runs.
6. Mixed traffic floors. Works alongside people and other vehicles with its four layers of safety protection.

Pricing and Availability

We do not print prices on this page. A quotation is the way to proceed: tell us your pallet type, your route and the number of trucks you need, and we will respond with a proposal. Delivery, customs and support are arranged together with the quotation. The SEER Robotics Autonomous Pallet Truck (SFL-CBD20) is available on this page.

Frequently Asked Questions

What load can the SFL-CBD20 carry?

The rated load capacity is 2000 kg at a load centre distance of 600 mm.

How fast does it drive?

It drives at 1.5 m/s with a full load and 1.66 m/s with no load.

How long does the battery last and how fast does it charge?

The comprehensive battery life is 10 h from the 51.2 V / 106 Ah battery. Charging from 10% to 80% takes 2 to 3 h, either manually or automatically.

How does the truck navigate?

It supports SLAM, reflector and NFL navigation, with a position accuracy of ±10 mm and an angle accuracy of ±1°. Three lidar units provide the sensing.

What pallets and forks does it use?

It handles open pallets. The forks measure 1220 x 173 x 60 mm and the fork outer width is 600 / 680 mm.

What operating conditions does it suit?

The operating range is 0℃ to 50℃ and 10% to 90% relative humidity, without compression or condensation.

Where can I buy the SFL-CBD20 and what does it cost?

You can request it through this page. The cost is set in a quotation based on your site and quantity, and delivery, customs and support are arranged with it.

Summary

The SFL-CBD20 answers a simple question: why should a pallet wait for a driver? With laser SLAM navigation, a 2000 kg rated load, a 10 h comprehensive battery life and four layers of safety protection, it moves open pallets on its own. The compact body and the choice of three navigation methods let it fit into existing buildings. For a quotation on the SFL-CBD20, this page is the starting point.