SEER Robotics SFL-CBD15 & SFL-CBD15-CE (SFL-CBD15 & SFL-CBD15-CE)
In stock
- BRAND:
- SEER ROBOTICS
- MODEL:
- SFL-CBD15 & SFL-CBD15-CE
- PART #:
- SFL-CBD15 & SFL-CBD15-CE
- ORIGIN:
- China
- Warranty:
- 12 MONTHS
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- SEER-Robotics-SFL-CBD15-SFL-CBD15-CE
SEER Robotics SFL-CBD15 & SFL-CBD15-CE (SFL-CBD15 & SFL-CBD15-CE)
A warehouse aisle does not forgive a wide machine, and a shift does not forgive a flat battery. The SEER Robotics SFL-CBD15 & SFL-CBD15-CE (SFL-CBD15 & SFL-CBD15-CE) is built around exactly those two pressures: a slim body that slips through tight lanes, and a lithium iron phosphate battery that keeps the work going. It is an autonomous pallet truck that finds its own way with Laser SLAM navigation and carries pallets, material racks and cages without a driver.
The product is available through this page, by quotation.
Background
The company behind the robot
SEER Robotics is listed in Hong Kong under the code 06106.HK. The company describes itself as a platform-based embodied intelligent robotics company built around what it calls the Robot Brain. It serves more than 2,500 customers worldwide with intelligent robotics solutions. For a buyer in the Caribbean, that matters in a practical way: an autonomous truck is not a stand-alone gadget. It is one piece of a wider system of navigation, control and fleet coordination, and the company's long track record with that system is part of what you are buying.
SEER Robotics builds a broad family of autonomous vehicles, from counterbalanced forklifts to stackers and pallet trucks. The SFL-CBD15 belongs to the pallet truck line, and you will find its relatives in our Logistics Robots and Factory Robots categories.
Two versions, one platform
This page covers two versions of the same truck. The SFL-CBD15 is the domestic, non-CE version. The SFL-CBD15-CE is the CE version. Both use Laser SLAM navigation, share the same standard lifting height and the same fork dimensions, and both charge from 10% to 80% in 1 hour. They differ in body size, weight, speed, battery capacity and sensor setup, and the table below keeps every figure with its own version.
The headline navigation capability is map recognition of up to 400000 m². Few sites will ever need that much, but it tells you the navigation layer is not the limit when a facility grows or when several buildings are joined into one map.
Technical Specifications
| Specification | SFL-CBD15 | SFL-CBD15-CE |
|---|---|---|
| Navigation type | Laser SLAM | Laser SLAM |
| Maximum map size | 400000 m² | 400000 m² |
| Dimensions L x W x H | 1712 x 932 x 1902 mm | 1685 x 980 x 1906 mm |
| Body width | 932 mm | 980 mm |
| Weight (with battery) | 388 kg | 403 kg |
| Driving speed (full load / no load) | 2 / 2 m/s | 1.4 / 1.4 m/s |
| Battery specification | 48 V / 23 Ah (lithium iron phosphate) | 48 V / 46 Ah (lithium iron phosphate) |
| Comprehensive battery life | 4 to 6 h | 8 to 10 h |
| Charging time (10% to 80%) | 1 h | 1 h |
| Standard lifting height | 205 mm | 205 mm |
| Fork dimensions L x W x H | 1220 x (170+7) x 75 mm (7 mm wiring panel) | 1220 x (170+7) x 75 mm (7 mm wiring panel) |
| Minimum turning radius | 1524 mm | 1532 mm |
| Lidar configuration | Not listed here | 1 (P+F OMD30M-R2000-B23-V1V1D-HD-1L) +2 (SICK nanoScan3 Core) |
| Certification: ISO 3691-4 and RED | Not listed | Standard |
| Operating environment | TEMP: 0℃ to 50℃ / RH: 10% to 90%, no compression, no condensation | TEMP: 0℃ to 50℃ / RH: 10% to 90%, no compression, no condensation |
Specifications as published by the manufacturer; confirmed against the datasheet at quotation.
The manufacturer has not published the ingress protection rating, the wireless standard details, the package contents, the noise level or the software and fleet system compatibility details; they are confirmed at quotation.
What is the difference between the SFL-CBD15 and the SFL-CBD15-CE?
The two names describe one truck tuned for two sets of priorities. The SFL-CBD15 is the faster and lighter of the pair. It drives at 2 m/s both loaded and unloaded, weighs 388 kg with its battery, and has a body width of only 932 mm. It also has the slightly tighter minimum turning radius, 1524 mm against 1532 mm.
The SFL-CBD15-CE trades some of that agility for endurance and compliance. Its battery is 48 V / 46 Ah rather than 48 V / 23 Ah, and the comprehensive battery life stretches to 8 to 10 h instead of 4 to 6 h. That is the difference between needing a charging window in the middle of a shift and sailing through it. The CE version is also the one for which ISO 3691-4 and RED are listed as standard, and its lidar setup is named: one P+F OMD30M-R2000-B23-V1V1D-HD-1L plus two SICK nanoScan3 Core units. In exchange, it is wider at 980 mm, heavier at 403 kg, and limited to 1.4 m/s in both loaded and unloaded driving.
How does it cope with narrow aisles and mixed loads?
The slim body is the point: 932 mm on the domestic version and 980 mm on the CE version, for smooth passage through narrow aisles. Add the compact turning radius and the Laser SLAM navigation, and the truck can work in racking layouts where a wider autonomous vehicle would need a redesign of the floor.
On the load side, the truck supports multiple sizes and types of pallets, material racks and cages. The forks measure 1220 x (170+7) x 75 mm, including a 7 mm wiring panel, and the standard lifting height is 205 mm. That makes it a ground-level transport machine, built to move loads between stations, rather than a stacker for high racking. For safety, it carries safety obstacle avoidance lasers, bumper strips, distance sensors and a hardware self-check.
Who is the SEER Robotics SFL-CBD15 & SFL-CBD15-CE for?
Plants and distribution centers that move pallets over repeatable routes are the natural fit. Think of a beverage distributor, a food packer, a hotel supply warehouse or a manufacturer that shuttles finished goods from the line to a dispatch bay. If your operators spend their day driving the same path with a pallet truck, this machine takes over that path.
Choose the SFL-CBD15 when speed and a narrow body matter most and when shifts leave room to recharge; charging from 10% to 80% takes 1 hour. Choose the SFL-CBD15-CE when the truck must run longer between charges, or when ISO 3691-4 and RED apply to your project. Exporters and operators who work to European requirements will want to look at the CE version first.
If your loads or lifting needs differ, SEER Robotics offers other vehicles that may suit you better, such as the SEER Robotics Autonomous Pallet Truck (SFL-CBD20) or the SEER Robotics 3 Ton Autonomous Pallet Truck (SFL-CBD30). Our team can compare them with you when you request a quotation.
What is the SEER Robotics SFL-CBD15 & SFL-CBD15-CE used for?
- Pallet transport between stations. The truck carries pallets along fixed routes from one point of the facility to another without a driver.
- Moving material racks. It handles material racks as well as pallets, which suits production areas that feed lines from rack stock.
- Handling cages. Cages used in order consolidation and dispatch are among the carrier types it supports.
- Narrow-aisle work. Its slim body lets it serve lanes that are tight for larger vehicles.
- Shift-long internal logistics. With a battery life of 4 to 6 h or 8 to 10 h depending on version, it covers whole stretches of a working day.
- Large-site operation. Map recognition up to 400000 m² allows the same navigation approach to be used across big or multi-building sites.
Pricing and Availability
We do not publish prices on this page. Every project differs in version, quantity, site layout and integration, so quotation is the way to get a clear offer. Send us your requirements and we will reply with a quotation for the version that fits. Delivery, customs and support are arranged together with the quotation. The SEER Robotics SFL-CBD15 & SFL-CBD15-CE is available on this page.
Frequently Asked Questions
What navigation does the truck use?
It uses Laser SLAM navigation and can recognize a map of up to 400000 m².
How fast does it drive?
The SFL-CBD15 drives at 2 m/s both with and without a load. The SFL-CBD15-CE drives at 1.4 m/s in both conditions.
How long does the battery last and how quickly does it charge?
The SFL-CBD15 gives 4 to 6 h with its 48 V / 23 Ah lithium iron phosphate battery. The SFL-CBD15-CE gives 8 to 10 h with its 48 V / 46 Ah battery. Both charge from 10% to 80% in 1 hour.
What kinds of loads can it carry?
It supports multiple sizes and types of pallets, material racks and cages. The forks are 1220 mm long and the standard lifting height is 205 mm.
What safety protections does it have?
It is equipped with safety obstacle avoidance lasers, bumper strips, distance sensors and a hardware self-check. The CE version lists ISO 3691-4 and RED as standard.
What conditions can it operate in?
The operating range is 0℃ to 50℃ with relative humidity of 10% to 90%, with no compression and no condensation.
Where can I buy the SEER Robotics SFL-CBD15 & SFL-CBD15-CE and what does it cost?
You can request it through this page. The cost is given in a quotation tailored to your version and project, since we do not list prices here.
Summary
The tension we started with, a machine slim enough for the aisle yet able to last the shift, is resolved by choosing the right version. The SFL-CBD15 favors speed and a 932 mm body. The SFL-CBD15-CE favors endurance, listed ISO 3691-4 and RED compliance and a named lidar setup. Both share Laser SLAM navigation, a 1-hour charge from 10% to 80% and support for pallets, racks and cages. For quotations, version advice and project questions, this page is the starting point.
