SEER Robotics Robotic Automatic Charging Station (SCS-2502)

Every robot fleet has a quiet weak point: the moment a battery runs low and somebody has to notice, walk over and plug it in. The SEER Robotics Robotic Automatic Charging Station (SCS-2502) is built to take that chore away from people. It gives a SEER robot a place to go when it needs power, and it still lets a technician charge by hand when that is the practical choice.

The product is available through this page, by quotation.

Background

SEER Robotics and its lineage

SEER Robotics (06106.HK) is a platform-based embodied intelligent robotics company built around the Robot Brain. It serves more than 2,500 customers worldwide with intelligent robotics solutions. A company with that kind of installed base thinks about the whole working day of a robot, not only the moment it moves a load. Charging is part of that day, and a fleet is only as productive as its ability to keep its machines powered.

That is why SEER Robotics lists charging stations as a product family of their own. The SCS-2502 is one member of that family, and the store carries other versions as well. You can see the wider range on the Charging Stations page.

Positioning and key technology of the SCS-2502

The SCS-2502 is an automatic charging station for robots. Its automatic charging is based on robots from SEER Robotics, so it is meant to work as part of a SEER deployment rather than as a generic power supply. It also supports manual charging, through an LP24-4P connector, so a person can top up a battery directly when needed.

Two further features define the unit. The first is a new industrial design. The second is intelligent charging: the station automatically adjusts its power supply strategy according to the battery feedback. In plain terms, the charger listens to the battery and does not push a fixed output regardless of the battery's state. The station is suitable for the SJV series (new, 25 A).

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the operating temperature range, the charging efficiency, the communication interface, the contents of the box, the certifications or the mounting method; they are confirmed at quotation.

What makes the SCS-2502 different from a plain battery charger?

A plain charger is a box that turns mains power into direct current. It has no idea which robot is connected and does not decide when charging happens. The SCS-2502 works differently. Its automatic charging is based on robots from SEER Robotics, which means the robot and the station are designed to meet each other without a person standing between them.

The second difference is the way power is delivered. The station automatically adjusts its power supply strategy according to the battery feedback. A battery that reports its own condition can be treated according to that condition. For a buyer, this matters because the battery is usually one of the most valuable parts of a mobile robot, and how it is charged shapes how long it serves.

The third difference is flexibility. Automatic charging is the main mode, but the station supports manual charging as well, through the LP24-4P connector. That is useful during commissioning, during maintenance, or when a robot has to be charged away from its normal routine.

How does the SCS-2502 fit into a robot fleet?

The station is suitable for the SJV series (new, 25 A), so the first step is to check that your robots belong to that series. If they do, the station gives the fleet a defined charging point. The maximum output voltage is 54.6±0.2 V and the input frequency is 50 / 60 Hz, which are the figures an electrician will want to see before planning the supply.

The footprint is 480 x 368.5 x 298.5 mm. That is the information needed to reserve floor or wall space near the robot route. Please send us the intended location so we can plan the installation with you. Other stations in the family exist for different needs, for example SCS-2002 and SCS-C4860. Please ask us to compare them against your robots before you decide.

Who is the SCS-2502 for?

The first group is operators of SEER robots in factories and warehouses. They want robots to recharge without a person involved, and they want the charging point to match the robot series. The second group is system integrators, who need a charging solution they can specify in a project and commission with a manual option as a fallback. The third group is maintenance teams, who value the LP24-4P connector because it lets them charge a robot directly on the bench.

Buyers who run robots outside the SJV series should not assume compatibility. Other stations such as SCS-C48100D or SCS-C4850D may be better matched, and we can check this for you. If your wider project involves automation on the factory floor, our Factory Robots page shows the machines these stations are meant to support.

What is the SCS-2502 used for?

1. Automatic recharging of SEER robots. The robot returns to the station and charges without an operator.
2. Manual charging by technicians. The LP24-4P connector allows a battery to be charged by hand.
3. Battery-aware charging. The station adjusts its power supply strategy according to battery feedback.
4. Fleet operation in logistics. A fixed charging point supports robots that move goods through a site.
5. Factory automation. Robots on production routes can be recharged between tasks.
6. Commissioning and testing. Integrators can use manual charging while a new robot installation is set up.

Pricing and Availability

We do not publish prices on this page. Please request a quotation and tell us which robots you run, how many stations you need and where they will be installed. Delivery, customs and support are arranged together with the quotation, so you receive one clear answer instead of several. The SEER Robotics Robotic Automatic Charging Station (SCS-2502) is available on this page.

Frequently Asked Questions

Does the SCS-2502 charge robots automatically?

Yes. Its automatic charging is based on robots from SEER Robotics. It is designed for use with SEER robots.

Can a robot also be charged by hand?

Yes, the station supports manual charging. The connector for manual charging is LP24-4P.

Which robots is the station suitable for?

The suitable product model is the SJV series (new, 25 A). Please tell us your robot model so that we can check the match.

What are the dimensions of the station?

The dimensions are 480 x 368.5 x 298.5 mm, given as length, width and height.

What are the electrical figures?

The input frequency is 50 / 60 Hz and the maximum output voltage is 54.6±0.2 V.

What should I send with my request?

Tell us your robot model, how many stations you need and where they will be installed. With that, we can prepare a complete answer.

Where can I buy the SCS-2502 and what does it cost?

You can request it through this page, by quotation. The cost depends on your project, so we give it in the quotation and not on the page.

Summary

A fleet of robots is only useful while its batteries hold out, and the weak point is usually the human step between a low battery and a charged one. The SCS-2502 is aimed at that step. It offers automatic charging based on SEER Robotics robots, manual charging through the LP24-4P connector, a new industrial design and charging that follows the battery feedback. Its figures are a compact 480 x 368.5 x 298.5 mm body, an input frequency of 50 / 60 Hz and a maximum output voltage of 54.6±0.2 V, for the SJV series (new, 25 A). If this matches your robots, this page is the starting point.