PUDU BG1 Pro AI-Native Large Scrubber-Dryer Robot
In stock
- BRAND:
- PUDU ROBOTICS
- MODEL:
- BG1 Pro
- ORIGIN:
- China
- Warranty:
- 12 MONTHS
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- PUDU-BG1-Pro
PUDU BG1 Pro AI-Native Large Scrubber-Dryer Robot
The hardest moment in floor cleaning is rarely the long, empty aisle; it is the wet spill, the stubborn stain and the strip of floor along the wall. The PUDU BG1 Pro AI-Native Large Scrubber-Dryer Robot is built around those moments, with sweeping modules that retract at a spill, brush pressure that rises for tough marks and a brush that reaches out to the edges.
The product is available through this page, by quotation.
Background
PUDU ROBOTICS and the BG1 series
PUDU ROBOTICS is a maker of service robots for commercial spaces, and its cleaning line runs from compact machines to large scrubber-dryers for big facilities. The BG1 series sits at the large end of that line. It has exactly two members, the PUDU BG1 and the PUDU BG1 Pro, and there is no third variant.
The two machines share the same cleaning widths, tank sizes, dimensions and communications. The Pro is the version with the upgraded navigation and the higher cruise speed, which we cover below.
Positioning and key technology
The BG1 Pro is a large autonomous scrubber-dryer for halls, warehouses, terminals and other wide floors where manual cleaning takes many hours. It navigates with 3D LiDAR and 3D VSLAM, which means it combines laser ranging with camera-based visual mapping to find its place and its way around.
Its cleaning behavior is adaptive. On detecting a wet spill, it instantly retracts the sweeping modules to prevent secondary spreading. For stubborn stains, it automatically boosts brush pressure for a spotless, single-pass clean. Its auto-dosing system scales detergent strength to match floor conditions, maximizing cleaning impact while minimizing waste.
Technical Specifications
| Specification | PUDU BG1 Pro |
|---|---|
| Battery capacity | 90 Ah (48V platform, equivalent to 180 Ah at 24V) |
| Navigation | 3D LiDAR + 3D VSLAM |
| Cruise speed | 0.2–1.2 m/s |
| Cleaning width | 550 mm / 708 mm with side brushes |
| Fresh / waste water tank | 75 l / 60 l |
| Dimensions (with squeegee) | 1,195 × 760 × 1,303 mm |
| Minimum path clearance | 85 cm |
| Communications | 4G, Wi-Fi, Bluetooth; e-gate / lift optional |
| Covered cleaning mode capacity | Up to 2000 m2/h (21,528 ft2/h) |
| Spot cleaning mode capacity | Up to 6000 m2/h (64,583 ft2/h) |
| Dust box capacity | 5 L (1.32 Gal US) |
| Cleaning agent capacity | Dual cleaning-agent boxes, approx. 7 L total |
Specifications as published by the manufacturer; confirmed against the datasheet at quotation.
The manufacturer has not published the noise level, the suction, the gradeability, the brush pressure figure, the IP rating, the workstation dimensions or the CE conformity documents; they are confirmed at quotation.
What does the BG1 Pro add over the BG1?
The two machines are close relatives, and the differences are in how the robot finds its way and how fast it moves. The BG1 Pro navigates with 3D LiDAR and 3D VSLAM, where the PUDU BG1 AI-Native Large Scrubber-Dryer Robot uses LiDAR with 3D VSLAM. The Pro also cruises at 0.2–1.2 m/s, against 0.2–1.0 m/s for the BG1.
Cleaning width, water tanks, dimensions, path clearance and communications are the same on both. If your floors are busy, with people, pallets and changing layouts, the Pro's navigation is the point to weigh. If the space is simpler and calmer, the BG1 may be enough for the job.
How does the BG1 Pro deal with spills, stains and edges?
Three behaviors set it apart from a machine that simply drives a fixed pattern. First, wet spills: when it detects one, it instantly retracts the sweeping modules so the liquid is not pushed across the floor. Second, stubborn stains: it automatically boosts brush pressure so the mark can be removed in a single pass.
Third, edges. The scrubbing brush can physically extend to reach walls and shelving edges, thoroughly removing dust and dirt along edges, improving coverage and minimizing manual touch-ups. Together with the 708 mm width with side brushes, this means less of the floor is left for a person with a mop.
Dosing follows the same logic. The dual cleaning-agent boxes hold approx. 7 L in total, and the system scales detergent strength to the floor condition instead of running one fixed dilution all shift.
Who is the PUDU BG1 Pro for?
The BG1 Pro suits operators with large, open floors and a need for consistent results: warehouses and logistics halls, airports and ferry terminals, shopping centers, convention spaces and large retail stores. It also suits facility managers who struggle to staff cleaning shifts and want a machine that works through them without supervision.
Because the minimum path clearance is 85 cm, the aisles and passages on your route need to be wider than that. Communications over 4G, Wi-Fi and Bluetooth, with e-gate and lift integration as options, help in buildings with several floors or controlled doors.
For tighter spaces, such as small shops or narrow corridors, a smaller machine such as the PUDU ET1 AI-Native Compact Scrubber-Dryer Robot may fit better. You can also browse the full Cleaning Robots range to compare.
What is the PUDU BG1 Pro used for?
- Warehouse and logistics floors. Long aisles and wide docks cleaned with a 550 mm scrubbing path, or 708 mm with side brushes.
- Airports and terminals. Busy concourses where a spill must be handled without spreading it.
- Retail halls and shopping centers. Large sales floors cleaned with edges along shelving reached by the extendable brush.
- Spot cleaning in traffic zones. A spot cleaning mode with capacity up to 6000 m2/h (64,583 ft2/h) for localized messes.
- Covered area cleaning. A covered cleaning mode with capacity up to 2000 m2/h (21,528 ft2/h) for full floor coverage.
- Multi-floor buildings. Optional e-gate and lift connectivity for sites where the robot has to pass doors or change levels.
Pricing and Availability
We do not print prices on this page. Quotation is the way to buy: tell us about your site and we prepare an offer for the PUDU BG1 Pro. Delivery, customs and support are arranged with the quotation. The PUDU BG1 Pro AI-Native Large Scrubber-Dryer Robot is available on this page.
Frequently Asked Questions
What is the difference between the PUDU BG1 and the BG1 Pro?
The BG1 Pro uses 3D LiDAR + 3D VSLAM navigation and cruises at 0.2–1.2 m/s. The BG1 uses LiDAR + 3D VSLAM and cruises at 0.2–1.0 m/s.
How wide is the cleaning path?
The cleaning width is 550 mm, or 708 mm with side brushes.
How much water does it carry?
The fresh water tank holds 75 l and the waste water tank holds 60 l.
Can it clean along walls and shelving?
Yes. The scrubbing brush can physically extend to reach walls and shelving edges, which improves coverage and reduces manual touch-ups.
What size is the robot, and what aisle width does it need?
With the squeegee it measures 1,195 × 760 × 1,303 mm. The minimum path clearance is 85 cm.
How does it connect to the building?
It communicates over 4G, Wi-Fi and Bluetooth, and e-gate and lift integration are optional.
Where can I buy the PUDU BG1 Pro and what does it cost?
You can buy it through this page, by quotation. The cost depends on your site and requirements, so we give it in the quotation rather than on the page.
Summary
A large floor is judged by its worst corner: the spill, the stain, the edge by the wall. The PUDU BG1 Pro answers each with a specific behavior: retracting sweeping modules, boosting brush pressure, extending its brush and scaling detergent to the floor. Add a 90 Ah battery on a 48V platform, 75 l and 60 l tanks and 3D LiDAR with 3D VSLAM navigation, and it is a serious candidate for large facilities in the Caribbean and beyond. If you want to see how it fits your site, this page is the starting point.
