PUDU MT1 Vac Al-powered Robotic Sweeper & Vacuum (10251-000003)

A floor is rarely one kind of dirty. A lobby has grit at the door, crumbs along the tile and fine dust settled into a carpet runner, and most robots are built to deal with only one of those. The PUDU MT1 Vac Al-powered Robotic Sweeper & Vacuum (10251-000003) is built for the whole picture. It sweeps, vacuums and dust mops on one autonomous platform, and it reads the surface beneath it so that the machine, not the operator, decides how hard to work.

The product is available through this page, by quotation.

Background

PUDU ROBOTICS and the MT1 family

PUDU ROBOTICS builds service robots for commercial settings, and floor care is one of the areas it works in. Commercial cleaning has its own demands: long routes, mixed surfaces, public traffic and teams that want equipment that runs without constant supervision. Robots for these jobs are judged less by a single clever feature than by how well they fit into a daily routine.

The sources for this product name three versions in the MT1 family: the MT1 Vac described on this page, the original MT1 and the MT1 Max. The figures in this article belong to the MT1 Vac alone. The fact sheet carries no figures for the other two, so we do not borrow numbers from them.

Where the MT1 Vac sits in the line-up

The MT1 Vac is positioned between the wet-cleaning-focused CC1 series and the original MT1 sweeper for large debris. In plain terms, it is a dry-cleaning machine that goes beyond picking up visible litter. It adds vacuuming and dust mopping to the sweeping job. Buyers whose main concern is wet cleaning can look at the PUDU CC1 Intelligent Commercial Cleaning Robot instead.

The key technology is AI-powered floor recognition. The robot identifies carpet and hard floors in real time and adjusts suction and brush speed automatically. Navigation combines VSLAM, Marker and LiDAR SLAM, so the robot has more than one way to know where it is as it works through a building.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the battery capacity, the IP rating, the noise level, the climbing ability or the contents of the charging station; these are confirmed at quotation.

What makes the MT1 Vac different from a sweeper-only robot?

A sweeper-only robot does well on loose litter such as wrappers, leaves and larger debris. It is less suited to the fine dust that settles into carpet fibers and along edges. The MT1 Vac covers both. It has a 55 cm (21.7 in) vacuuming width for fine particles and a 70 cm (27.6 in) sweeping width with the side brush for the wider pass along walls and furniture. Dust mopping completes the dry-cleaning toolkit on hard floors.

The air side matters too. The filtration level is H11, with H13 as an option. In places where people breathe the air all day, such as hotels, offices and waiting areas, the choice of filter is part of the purchasing decision, and you can raise it when you request a quotation.

The load is carried in two separate containers: a 14 L dust bag, made up of two 7 L bags, and a 6 L trash bin. Fine dust and larger debris go to different places, which makes emptying simpler to organize for the cleaning crew.

How does the MT1 Vac handle carpet and hard floors?

Many buildings change surface every few meters. A tiled entrance gives way to a carpeted corridor, which opens into a polished hall. The MT1 Vac identifies carpet and hard floors in real time and adjusts suction and brush speed automatically. Nobody has to split the building into zones by hand or stop the robot to change a setting at each transition.

Moving between those surfaces, the robot cruises at 0.2 m/s to 1.2 m/s. It needs a path at least 75 cm (29.53 in) wide, so aisles, corridors and gaps between furniture should be checked against that figure before deployment. At 75 kg (165.35 lbs) and 840 x 600 x 490 mm (33 x 23.6 x 19.3 in), it is a substantial machine, and that is worth remembering when planning storage and transport.

Run-time is 3-6.5 h, and standard sweep and vacuum mode on hard floors gives 4 h. The wide range reflects the different modes and floors the robot may work on, so plan the cleaning schedule around the mode you will actually use.

Who is the PUDU MT1 Vac for?

The MT1 Vac suits facility managers who need one robot to cover mixed dry floors. Hotels, office buildings, shopping centers, airports, schools and hospital corridors all fit that description. It is also a good match for contract cleaning companies that want to take over the repetitive daily passes and leave staff free for detail work.

Buyers who mostly have large debris to clear may find the original MT1 sweeper the closer fit, as the MT1 Vac sits between it and the CC1 series. Buyers who want to look at the top of the MT1 family can see the MT1 Max. Those who want to see the wider range can browse our Cleaning Robots category.

What is the PUDU MT1 Vac used for?

1. Daily floor care in hotels. Corridors, lobbies and function areas where tile and carpet alternate.
2. Office and campus cleaning. Regular dry passes through open-plan areas and long hallways after hours.
3. Retail and shopping centers. Sweeping and vacuuming across large, busy concourses.
4. Airports and transport hubs. Continuous removal of grit and dust from wide public floors.
5. Fine dust control. Vacuuming carpets with H11 filtration, or H13 as an option, where air quality counts.
6. Dust mopping hard floors. A dry finishing pass that lifts fine particles from smooth surfaces.

Pricing and Availability

We do not publish prices for this robot, because configuration and options, such as the filter level, are set for each project. Request a quotation and we will prepare it for your site. Delivery, customs and support are arranged with the quotation. The PUDU MT1 Vac is available on this page.

Frequently Asked Questions

What can the PUDU MT1 Vac clean?

It sweeps, vacuums and dust mops. It is a dry-cleaning robot, and wet cleaning is the focus of the CC1 series.

How does it tell carpet from hard floor?

AI-powered floor recognition identifies carpet and hard floors in real time. It then adjusts suction and brush speed automatically.

How wide a path does it clean?

The vacuuming width is 55 cm (21.7 in), and the sweeping width is 70 cm (27.6 in) with the side brush.

How long does it run?

Run-time is 3-6.5 h. Standard sweep and vacuum mode on hard floors gives 4 h.

Can parts be changed without tools?

Yes. The dust mop, dustbin, trash bin, roller brush and side brushes can be swapped in seconds without tools.

Are the battery capacity and IP rating listed?

No, they are not listed on this page, and neither is the noise level. Ask for them when you request your quotation.

Where can I buy the PUDU MT1 Vac and what does it cost?

You can request a quotation on this page, and we will prepare an offer for your project. Pricing depends on configuration and options, so no price is listed here.

Summary

The case for the MT1 Vac is that a floor is rarely one kind of dirty, and one machine now covers sweeping, vacuuming and dust mopping. Floor recognition handles the change from carpet to hard floor, tool-free parts keep routine servicing short, and the figures above show whether it fits your building. For a quotation on the PUDU MT1 Vac, this page is the starting point.