Geek+ P500R Warehouse Picking Robot

Most warehouses do not need a bigger machine; they need a steadier one that moves the shelf to the picker and keeps doing it shift after shift. The Geek+ P500R Warehouse Picking Robot is built around that plain idea: a low, flat autonomous mobile robot that slides under a rack, lifts it and carries it to a person, so the picker stays put and the inventory comes to them.

The product is available through this page, by quotation.

Background

Geek+ and the P Series

Geek+ is a robotics brand that builds autonomous mobile robots for warehouses and logistics operations. Its catalog is organized in families, and the P Series is the family aimed at shelf-to-person picking. P Series robots are modular, multi-purpose, versatile and smart, and that description explains how the family is meant to be used: one robot platform, adapted to different racks, different item sizes and different order flows, rather than a one-off machine for a single layout.

For buyers in the Caribbean, where many distribution sites are compact and grow in steps, a modular approach matters. A site can begin with a small group of robots and a defined set of racks, then extend the fleet as order volumes grow, without redesigning the whole building around a fixed conveyor line.

Where the P500R sits

The P500R is the picking robot of the series that this page covers. It works on a goods-to-person principle: the robot travels beneath a shelf, raises it, and brings it to a station where a worker picks the items needed. Because the robot does the walking, the worker does not. That removes much of the travel time that normally makes up a large share of a manual picking shift.

Two further versions exist, the P500R-IWD V5.1 and the P500R-LNU V5.2. The figures on this page belong to the P500R alone, and none are borrowed from the other two. If your project calls for one of those versions, name it when you request a quotation.

Software is part of the picture as well. Integration covers ERP, WMS and MES systems, with open APIs and multi-language support. In practice that means the robot fleet can take its work from the systems that already run your orders, rather than asking staff to key tasks in twice. Readers comparing the wider range can browse the Warehouse Robots category or the AMRs category.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the ingress protection rating, the time needed to charge fully, the noise level or the contents of the box; they are confirmed at quotation.

What makes the P500R suited to small-scale warehouse picking?

A picking robot is judged by how well its numbers fit the shelf and the floor, not by any single figure on its own. The P500R carries up to 600 kg and supports shelves up to 880mm x 880mm. Together those two figures describe a robot meant for racks holding small and medium-sized items, the kind of stock found in e-commerce, retail replenishment and spare-parts rooms, rather than heavy pallet loads.

The body is low, at 275mm in height, with a footprint of 950mm x 702mm. A low profile is what lets a robot of this type pass beneath a rack and still leave aisles workable. The lift itself is quick: the minimum lifting time is 4 seconds, which keeps the pause between arriving under a shelf and moving off with it short.

Travel speed comes in two conditions. Without load the robot reaches 2 m/s; at full load it reaches 1.6 m/s. The difference is small, so a loaded robot does not slow to a crawl. The maximum slope angle is 2.5°, a slope of 4.4%. That is a gentle ramp, so planners should treat the P500R as a robot for essentially level floors with the odd transition, and should check any ramp on the planned route against that figure.

How does the P500R keep working through a shift?

The run time is 10 minutes of charging followed by 2 to 3 hours of work. That pattern points to short, frequent top-ups between tasks rather than long pauses for a full recharge. For a site that runs several shifts, it means charging can be planned into the work rhythm: a robot returns to charge, comes back to the floor, and the fleet is sized so that enough units are active at any time.

Dusty back rooms and quiet pharmacy or retail settings each put different demands on a robot, so describe your floor and your environment when you ask for a quotation, and we will take it from there.

Who is the Geek+ P500R for?

The first group is the owner or operations manager of a small to mid-sized warehouse that already uses racks and handles small to medium items. These buyers usually have a picking problem that is really a walking problem, and a shelf-to-person robot answers it directly.

The second group is the systems integrator planning an automation project for a client. The open APIs and the ERP, WMS and MES integration give an integrator a clear route to connect the robots to existing software, and the multi-language support helps where teams on one site work in more than one language.

The third group is the logistics or fulfillment operator that expects to grow. Because the P Series is modular, a first deployment can be modest and widen later. Buyers who need other robot classes, such as larger intralogistics machines, can compare the wider AMRs range before deciding. If your project requires the P500R-IWD V5.1 or the P500R-LNU V5.2, say so in your request so the correct version is quoted.

What is the Geek+ P500R used for?

1. Goods-to-person picking: the robot lifts a rack and brings it to a station, so the picker works in one place.
2. E-commerce fulfillment: small and medium items held on racks are brought forward as orders arrive.
3. Retail replenishment: shelves of store stock are delivered to the point where cartons are built.
4. Put-away and sorting: the same robot moves racks to receiving stations, so new stock reaches its shelf location without manual carrying.
5. Spare parts and small-item storage: compact racks of components are served to a counter or a workstation.
6. Third-party logistics: a shared robot fleet serves several clients' racks, with tasks passed in from the warehouse system.

Pricing and Availability

No price is shown on this page, because each project differs in the number of robots, the racks and the software setup. Quotation is the way to proceed: send us your site details, the version you need and your expected volumes, and we will respond with a quotation. Delivery, customs and support are arranged together with the quotation. The Geek+ P500R Warehouse Picking Robot is available on this page.

Frequently Asked Questions

How much can the P500R carry?

The maximum payload is 600 kg. The largest shelf it supports is 880mm x 880mm.

How fast does it travel?

It reaches 2 m/s without load and 1.6 m/s at full load. The minimum lifting time is 4 seconds.

How long does it run before it needs charging?

Ten minutes of charging gives 2 to 3 hours of work.

Can it climb ramps?

The maximum slope angle is 2.5°, which is a slope of 4.4%. Any ramp on your route should be checked against that figure.

Does it connect to our warehouse software?

Integration covers ERP, WMS and MES systems, with open APIs and multi-language support. Send us the details of your own systems with your request.

What about the ingress protection rating and noise level?

They are named in the note under the specification table. Tell us about your site conditions and we will come back with them in the quotation.

Where can I buy the Geek+ P500R Warehouse Picking Robot and what does it cost?

You can request it through this page, by quotation. The cost depends on the version, the quantity and the project, so it is given in the quotation and not printed here.

Summary

The case for the P500R is simple: bring the shelf to the picker instead of sending the picker to the shelf. With a 600 kg payload, support for shelves up to 880mm x 880mm, a 4-second minimum lifting time and a low 275mm body, it fits racks of small and medium items. Short charging and open software integration let it fit into a working shift and an existing system. For a quotation on the version your project needs, this page is the starting point.