Geek+ RS8-DA RoboShuttle Robot

Eight meters is a long climb for a single tote, and most warehouses still make people or slow machines do it one container at a time. The Geek+ RS8-DA RoboShuttle Robot is built for that climb. It is an autonomous mobile robot that carries its own doorframe and telescopic fork arms, reaches into tall racking, and brings containers back to a workstation without a person leaving the aisle.

The Geek+ RS8-DA RoboShuttle Robot is available through this page, by quotation.

Background

Geek+ and its lineage

Geek+ was founded in 2015. The company uses robotics and artificial intelligence to build warehouse and supply chain systems that are meant to be flexible, reliable and efficient. Its work is aimed at warehouses and supply chain management, which is where integrators and operators meet it.

The RS family belongs to that line. The sources name five versions: RS5-D, RS8-DA, RS8-DX, RS11-DA and RS11-DX. The RS8-DA is the version this page covers, and every figure below belongs to it alone. Where a sibling is mentioned, it is mentioned by name only, with no figure borrowed from it.

Positioning and key technology

The RS8-DA is a tote-handling robot for high racking. Its design combines a slim and robust chassis, a flexible doorframe and double-deep telescopic fork arms. The slim chassis matters in dense layouts, where aisle width is a cost. The doorframe carries the load up and down the rack. The double-deep arms reach past the first position, so containers stored in deeper rows stay within the robot's reach.

Sensing is the second pillar. An intelligent depth camera and high-precision sensors let the robot adjust its arms to pick boxes of varying sizes. That improves the use of shelf space, because the racking does not have to be planned around a single container size. Connected to a warehouse management system (WMS) and driven by intelligent algorithms, the robot can autonomously transfer up to eight totes to and from a workstation.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the battery runtime, the IP rating, what is in the box, the wireless connectivity, the power consumption or the noise level; they are confirmed at quotation.

What makes the RS8-DA different from a conventional tote shuttle?

A conventional tote shuttle works inside the rack: it is part of the storage structure and serves one system. The RS8-DA is a free-roaming robot. It drives to the rack, lifts its fork arms to the right level, takes the container and returns to a workstation. That gives a project more freedom in layout, and it lets the same fleet serve several areas.

The reach figures show what that means in practice. The fork arms can access inventory rows of varying depth, placed as low as 285mm and as high as 7820mm. That covers horizontal as well as vertical warehouse space, and it fits the 8-m-high racks the robot is designed for. A buyer who is limiting racking height because of manual picking can look at the vertical space again.

The depth camera is the other difference. Many handling systems expect containers of one size. The RS8-DA adjusts its arms for boxes of varying sizes, and it handles totes, cartons and boxes of varying width. For operations that mix container types, that reduces the number of exceptions a project must plan around.

Is the RS8-DA safe and compliant for international projects?

The RS8-DA is CE, ETL and FCC marked. It is also compliant with the EU Machinery Directive 2006/42/EC and UL 3100 Ed. These marks matter early in a project, when a safety officer, an insurer or a customs broker asks what the machine is certified for. Because compliance depends on the installation as a whole, the project team should review the certificates and the exact scope with the installer.

For a Caribbean site, the practical questions are climate, power supply, wireless coverage and local support. Give us your site conditions and we will take them into the quotation.

Who is the Geek+ RS8-DA RoboShuttle Robot for?

The first segment is the operator with tall racking and a labor problem. A distribution center, e-commerce fulfillment site or third-party logistics provider that stores tote inventory up to 8 m high gains the most, because the robot does the vertical work that is slow and awkward for people.

The second segment is the integrator. A system integrator who designs goods-to-person or tote-to-person workflows needs a robot that talks to a WMS and moves several containers per trip. The RS8-DA is built for that role, and the up-to-eight-totes transfer is the figure to bring into a throughput model.

The third segment is the manufacturer or retailer with mixed container sizes. Boxes, cartons and totes of varying width are within the design, so the robot suits sites that have not standardized on one container.

If your racking is lower or your containers are fewer, a lighter machine may fit better. You can compare other Geek+ options in our AMRs category, or browse the wider Warehouse Robots range. The RS5-D, RS8-DX, RS11-DA and RS11-DX are named by the sources as siblings; ask us how they differ and which suits your rack height.

What is the Geek+ RS8-DA RoboShuttle Robot used for?

1. Tote retrieval from tall racks. The fork arms reach positions from 285mm up to 7820mm on 8-m-high racking.
2. Tote transfer to workstations. Connected to a WMS, the robot moves up to eight totes to and from a workstation.
3. Deep-row storage access. Double-deep telescopic arms reach inventory rows of varying depth.
4. Mixed container handling. The depth camera and sensors let the arms adjust to boxes of varying sizes.
5. Shelf space optimization. Adjusting to container size lets operators use rack space more fully.
6. Automated fulfillment support. The robot supports tote-based picking flows in e-commerce, retail and third-party logistics sites.

Pricing and Availability

The RS8-DA is sold by quotation, because each project differs in rack height, container mix, WMS and fleet size. Tell us about your site and we will prepare a quotation for your project. Delivery, customs and support are arranged with the quotation. The Geek+ RS8-DA RoboShuttle Robot is available on this page.

Frequently Asked Questions

How many totes can the RS8-DA carry?

Connected to a WMS, the robot can autonomously transfer up to eight totes to and from a workstation.

How high can it reach?

It is designed for 8-m-high racks. Its fork arms access positions as low as 285mm and as high as 7820mm.

Can it handle different box sizes?

Yes. An intelligent depth camera and high-precision sensors let it adjust its arms to pick boxes of varying sizes. It is compatible with totes, cartons and boxes of varying width.

Which certifications does it hold?

It is CE, ETL and FCC marked, and compliant with the EU Machinery Directive 2006/42/EC and UL 3100 Ed.

Does it need a warehouse management system?

The transfer of totes to and from a workstation is described as connected to a WMS and driven by intelligent algorithms. Tell us which WMS you run and we will discuss the integration in the quotation.

Which versions are in the RS family?

The sources name the RS5-D, RS8-DA, RS8-DX, RS11-DA and RS11-DX. This page covers the RS8-DA only.

Where can I buy the Geek+ RS8-DA RoboShuttle Robot and what does it cost?

You can request it through this page. The cost depends on your project, so we prepare a quotation with no list price shown here.

Summary

The RS8-DA answers a simple question: how do you reach the top of an 8-m rack without sending a person up there? Its double-deep telescopic fork arms reach from 285mm to 7820mm, its depth camera adapts to container sizes, and its WMS link moves up to eight totes per trip to a workstation. CE, ETL and FCC marks and compliance with the EU Machinery Directive 2006/42/EC support the safety conversation. If tall racking and tote handling are your challenge, this page is the starting point.