Booster T2 Professional P1 Humanoid Robot + Free Delivery

A humanoid robot is only as useful as the hours it stays on its feet. Many platforms impress for ten minutes and then wait on a charger while the team waits with them. The Booster T2 Professional P1 Humanoid Robot + Free Delivery is built with that working day in mind: a magnetic charging port that supports charging while in use, a 48 V, 10 Ah battery rated for 2 hours of continuous walking, and onboard computing strong enough to run perception and control on the robot itself.

The product is available through this page, by quotation.

Background

Booster Robotics and the T2 line

Booster Robotics builds humanoid platforms for research, education and competition, and its catalog runs from compact models to full-size development robots. The T2 line sits at the larger end of that range. It is a standing humanoid of about 1.4 m (140 cm) with a full set of limbs, meant for teams that want to test walking, perception and manipulation on real hardware rather than only in simulation.

Within the T2 line there is an Education version and a Professional version. The Professional version comes in three trims that differ by end effector: the P1 as the base model, the P2 with a standard gripper and the P3 with a dexterous hand. This page covers the Professional P1. If your work depends on a gripper, the Booster T2 Professional P2 Humanoid Robot + Free Delivery is the sibling to look at.

Positioning and key technology

The Professional P1 is aimed at teams that write their own software. Secondary development is supported, so the robot is a platform to build on rather than a sealed product. The compute module is a Jetson Thor T5000 with 2070 TFLOPS of AI computing power, which gives researchers room to run modern perception and learning workloads locally.

The mechanics follow the same practical thinking. Joints use industrial-grade crossed roller bearings on the output side and high-speed internal-rotor PMSM motors. The maximum peak torque is 140 N·m. Binocular cameras in the head and the waist give the robot a wide view of the space around it, and a microphone array with a speaker handles audio.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the IP rating, the dimensions in the box, the contents of the box, the charging time, the operating system, the camera resolution or the joint range of motion; they are confirmed at quotation.

What makes the Booster T2 Professional P1 different from a smaller humanoid?

Size changes what a robot can do. At about 1.4 m, the T2 works at a height where tables, shelves and doorways start to matter. Seven degrees of freedom in each arm give the arms the reach and flexibility that manipulation research needs, and six in each leg support the walking work. Across the whole body there are 31 degrees of freedom, with a walking speed of 3 m/s and a maximum dual-arm payload of 10 kg*.

Compute is the second difference. Smaller educational humanoids often send heavy workloads to an external computer. Here the Jetson Thor T5000, with 2070 TFLOPS of AI computing power, sits on the robot, so teams can develop perception and control loops that run on the machine itself. Ethernet, a USB Type-C® Locking Connector, Wi-Fi 6 and Bluetooth 5.2 give you several ways to connect during development.

If you are weighing other sizes, the Bipedal Humanoids category shows the wider range from Booster Robotics and other makers.

What does the end effector choice mean for the P1?

The end effector is optional: standard, gripper or dexterous hand. The P1 is the base model, the P2 carries a standard gripper and the P3 a dexterous hand. In practice, the P1 suits teams focused on locomotion, perception and whole-body control, where the hands are not the main subject. Teams that need to pick up and move objects from the first day will want to compare it with the P2 before they decide.

Who is the Booster T2 Professional P1 for?

University laboratories and research groups are the clearest fit. A platform with onboard AI computing, supported secondary development and a safety system with both soft and hard emergency stops lets graduate students work on real hardware with a sensible safety net.

Competition teams form a second group. Walking speed, a steady body and strong compute matter when a team is building football behavior, and the Football Robots category has more on that application. Companies building early prototypes for humanoid applications, and training centers that want a serious teaching platform for embodied AI, will also find the P1 a workable starting point. Buyers who know they need a gripper from the start should look at the Professional P2 instead.

What is the Booster T2 Professional P1 used for?

1. Embodied AI research. Run perception, planning and learning on a full-size body with onboard compute.
2. Locomotion development. Test walking and balance strategies with 6 degrees of freedom in each leg.
3. Robot soccer and competition. Build and refine behavior for football-style events.
4. Manipulation experiments. Use 7-degree-of-freedom arms and an optional end effector to study reaching and handling.
5. Teaching and training. Give advanced students hands-on work with a real humanoid and its developer interfaces.
6. Application prototyping. Try out humanoid ideas for real settings before committing to a larger program.

Pricing and Availability

Pricing for the Booster T2 Professional P1 is provided by quotation, so please send us your request with the configuration you need, including the end effector and whether you want the optional LiDAR. Delivery, customs and support are arranged together with the quotation. The Booster T2 Professional P1 Humanoid Robot is available on this page.

Frequently Asked Questions

How long does the battery last?

The 48 V, 10 Ah battery is rated at 2 hours of continuous walking. The robot also supports charging while in use through its magnetic charging port.

How many degrees of freedom does it have?

The Professional line has 31 degrees of freedom in total, with 7 in each arm and 6 in each leg.

What computer runs inside the robot?

It uses a Jetson Thor T5000 with 2070 TFLOPS of AI computing power.

Can I write my own software for it?

Yes. Secondary development is supported, and the robot offers Ethernet, a USB Type-C® Locking Connector, Wi-Fi 6 and Bluetooth 5.2 for connecting to it.

Does it come with a gripper or a dexterous hand?

The end effector is optional: standard, gripper or dexterous hand. The P1 is the base model, while the P2 and P3 carry the gripper and the dexterous hand.

What safety features does it have?

It has both a soft and a hard emergency stop.

Where can I buy the Booster T2 Professional P1 and what does it cost?

You can request it through this page. The price is given in a quotation, which also covers delivery, customs and support.

Summary

A humanoid earns its place by staying useful hour after hour, not by a single impressive demonstration. The Booster T2 Professional P1 brings a 140 cm body with 31 degrees of freedom, a Jetson Thor T5000 with 2070 TFLOPS, a battery rated for 2 hours of walking and a charging port that works while the robot is running. Add supported secondary development and a choice of end effectors, and it is a sound base for research, competition and prototyping. To request a quotation for your configuration, this page is the starting point.