Senad Telescopic Belt Conveyor

A loading dock is only as fast as its last few meters. The Senad Telescopic Belt Conveyor is built for exactly that stretch: a belt conveyor that grows and shrinks, so goods travel on a belt instead of in someone's arms. Fixed conveyors stop at the dock door, and people carry the load the rest of the way. A telescopic design closes that gap and lets the length follow the job.

The product is available through this page, by quotation.

Background

Senad and its engineering base

Senad is a national high-tech enterprise with its own software development team, and it describes its research and development as complete, fast and efficient. Both the company and the factory are located in Shanghai. That matters to a buyer in practical terms: design, production and customization sit under one roof, which keeps conversations about options such as color or OEM and ODM work direct.

The brand is better known for automation equipment, and you can see the wider range on the Senad category page. The telescopic belt conveyor is the straightforward, mechanical member of that family: no complicated concept, just a well-understood machine adapted to a very common problem.

How the telescopic concept works

The idea is simple. Take an ordinary belt conveyor and add a telescopic mechanism, so that the length can be adjusted freely to the size of the site and to the actual demand. When the machine is retracted, it takes little room. When a vehicle or container needs to be reached, the conveyor extends toward the load and the belt carries goods over the distance.

The belt is reversible, so the same machine can serve both directions of work. It can bring goods out of a vehicle, or it can carry them in. The tilt can be adjusted by hydraulic, which lets the conveyor end be set to the height of the work. Together, these features make one machine useful at more than one door and in more than one routine.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the supply voltage, the IP rating, the noise level, the maximum load per belt section, the control system, the operating temperature, the certifications or the wheels and mobility mechanism; they are confirmed at quotation.

What makes a telescopic belt conveyor different from an ordinary one?

An ordinary belt conveyor has a fixed length. If the vehicle is deeper than the conveyor, people must carry goods across the remaining distance, and if the conveyor is too long for a small site, it sits in the way. The telescopic mechanism removes that compromise. The length can be adjusted freely to the site size and to the real demand of the day, rather than being decided once at purchase.

Under the condition of meeting human body engineering, the machine can effectively reduce damage to goods and the labor intensity of personnel, and improve the efficiency of loading and unloading vehicles. Those are the three gains a dock manager usually looks for: fewer damaged items, less strain on the team, and quicker turnaround at the door.

The belt itself can be specified in 600mm or 800mm width, and the belt material is listed as PVC, PU, rubber or steel rubber. This gives you room to match the belt surface to the goods you actually move. The structure is stainless steel, a sensible choice for a machine that works at the exposed edge of a building.

Which version should I choose?

The product comes in four versions: TBC2S-6/4, TBC3S-6/8, TBC4S-6/12 and TBC5S-6/14. Belt width, belt direction, belt speed, capacity and tilting are the same across the range. To point you to the right one, tell us your vehicle or container depth and your dock layout when you request a quotation.

If the machine must be color matched to a facility, or if you need OEM or ODM work, say so at the same time. Both are supported, and device color can be customized.

Who is the Senad Telescopic Belt Conveyor for?

The first group is operators of distribution centers and warehouses whose staff carry goods by hand between a dock door and the back of a vehicle. For them, the benefit is clear: shorter carrying distance, less fatigue and fewer dropped items.

The second group is manufacturers and packers who load finished products onto trucks. A reversible belt lets one machine serve both outbound and inbound work, which suits sites that cannot dedicate a separate conveyor to each direction.

The third group is integrators and project buyers who need a material transfer system with a telescopic requirement. Vehicle loading and unloading and material transfer are the main uses. If your project is part of a wider automation plan, you may also look at related Senad equipment such as the Senad Automated Guided Vehicles (AGVs), which address the movement of goods inside the building rather than at the door.

Smaller operators in island markets, where space is tight and labor is precious, will find the adjustable length helpful too. The machine can be retracted when it is not in use and extended when a vehicle arrives.

What is the Senad Telescopic Belt Conveyor used for?

1. Vehicle loading: The extended belt carries goods into a vehicle so staff do not need to walk each item to the far end.
2. Vehicle unloading: The reversible belt brings goods out toward the dock, ready for sorting or staging.
3. Material transfer systems: The conveyor links two points in a flow where the distance between them changes from job to job.
4. Reducing handling damage: A belt that carries goods steadily reduces the chances of drops and knocks that come with long manual carries.
5. Easing the workload: Less carrying lowers the labor intensity of personnel at the dock.
6. Height-adjusted transfer: The hydraulic tilting of 0~+5o lets the belt end be set to suit the work position.

Pricing and Availability

We do not print prices on this page. Quotation is the next step: tell us the version you are considering, the belt width of 600mm or 800mm, the goods you move and the site where the machine will work. Delivery, customs and support are arranged with the quotation. The conveyor ships in a wooden case, and the Senad Telescopic Belt Conveyor is available on this page.

Frequently Asked Questions

What belt widths are available?

The belt width is 600mm or 800mm. Tell us which suits your goods when you request a quotation.

Can the belt run in both directions?

Yes. The belt direction is reversible, so the same machine can serve loading and unloading.

How fast does the belt run?

The belt speed is adjustable from 0 to 36M/minute. This lets you match the pace to the goods and to your team.

What is the capacity?

The capacity is 60kg/meter. Ask us about your load when you request a quotation.

Can the conveyor be tilted?

Yes. Tilting is 0~+5o, adjustable by hydraulic.

Can the color or design be customized?

OEM and ODM services are supported, and the device color can be customized. Please describe your requirements when you ask for a quotation.

Where can I buy the Senad Telescopic Belt Conveyor and what does it cost?

You can buy it through this page, by quotation. We do not list prices here; send us your version and site details and we will respond with a quotation.

Summary

The walk between the dock door and the back of the vehicle is a small distance that costs a great deal over a year. The Senad Telescopic Belt Conveyor answers it by letting the belt do the traveling: adjustable length, a reversible belt, hydraulic tilting from 0 to +5o, a stainless steel structure and a choice of 600mm or 800mm belt width. If you want to shorten that walk at your dock, this page is the starting point.