SIASUN Xinsong Thin Plate Welding Machine System

Thin sheet gives a welder very little room for error. Too much heat and the panel warps or burns through; too little control and the seam needs grinding before paint. The SIASUN Xinsong Thin Plate Welding Machine System is a robotic arc-welding kit built around that problem, pairing an SR-series robot with a named welding machine and torch so the arc stays soft and the heat input stays low.

The product is available through this page, by quotation.

Background

SIASUN and the welding kit range

SIASUN is a robotics brand, and its welding kit system is organized into three solutions: thin plate, medium and thick plate, and ultra-low spatter. Each solution matches a different kind of work. The thin plate solution described here is the one for thin sheet. Its heavier counterpart is the SIASUN Medium And Thick Plate Welding Machine Set, which is for thick sheet.

Organizing the range this way is practical for a buyer. Instead of choosing a robot, a power source and a torch one by one and hoping they work well together, you start from the material you weld and receive a kit whose parts are already named and matched to that work.

What defines the thin plate solution

The thin plate kit combines three named components: an SIASUN robot from the SR12A-12/1.46 or SR25A-12/2.01 models, an Aotai MAG-350Pro RII-Plus welding machine, and a Loyee torch from the GL350N-HDA, TRM 352P or ARH6350 models. The application area is arc welding.

The result on the seam is described plainly: the arc is soft, the spatter is small and has little adhesion, droplet transfer is smooth, heat input is low, and the bridging ability is strong. Each of these matters on thin material, and the sections below explain why.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the robot payload, the robot reach, the repeatability, the welding current range, the system weight, the power supply requirements, the dimensions, the wire diameter compatibility or what is in the box; they are confirmed at quotation.

What makes the thin plate system different from the medium and thick plate solution?

The difference starts with the material. The thin plate solution is for thin sheet, while the medium and thick plate solution is for thick sheet. Thick plate welding usually asks for deep penetration and high deposition, whereas thin sheet asks for restraint. That is why the thin plate kit is described by its low heat input, its soft arc and its strong bridging ability, which are qualities that protect light material rather than push into heavy sections.

The kit is also specific about its parts. The thin plate solution lists two robot models, one welding machine and three torches. A buyer comparing the two kits can therefore see what the thin plate version actually contains and ask for the same level of detail on the other. If your work is mostly heavy fabrication, the medium and thick plate set is the natural place to begin instead.

Why do low heat input and a soft arc matter on thin sheet?

Heat is the main enemy of thin material. When a seam receives more heat than the sheet can carry away, the panel distorts, and the distortion shows up later as parts that no longer fit, as a finish that needs rework, or as burn-through. Low heat input reduces that risk at the source.

A soft arc and smooth droplet transfer work in the same direction. Small spatter with little adhesion means fewer particles stuck to the surface, which reduces cleaning before painting or assembly. Strong bridging ability helps when the gap between two edges is not perfectly even, a common situation with formed sheet parts. These are the qualities the manufacturer states for this kit, and they are the reasons to choose it for light material.

Who is the SIASUN Xinsong Thin Plate Welding Machine System for?

The kit suits fabricators and manufacturers whose daily work is thin sheet and who want arc welding handled by a robot. That includes shops that make enclosures, light frames, panels and similar parts where appearance and flatness count as much as strength. It also suits buyers who prefer to purchase a matched robot, welding machine and torch as one solution rather than assemble the pieces themselves.

Workshops that weld mostly heavy sections should look at the SIASUN Medium And Thick Plate Welding Machine Set. Buyers who want to compare other welding cells can browse the Welding Robots category or the wider Industrial Robots category. For Caribbean fabricators, a single matched kit can also simplify training and support, since the operator learns one system rather than several unrelated ones.

What is the SIASUN Xinsong Thin Plate Welding Machine System used for?

1. Thin sheet seam welding. Arc welding of light panels where heat must stay low to protect the material.
2. Parts that need little rework. Small, low-adhesion spatter reduces the cleaning needed before finishing.
3. Joints with uneven gaps. Strong bridging ability helps where edges do not meet perfectly.
4. Repeatable production welding. A robot carries out the same weld path part after part.
5. Fabrication of light assemblies. Enclosures, frames and similar sheet metal structures suit this kind of kit.
6. Replacing manual arc welding. Shops can move repetitive thin sheet work from the hand torch to a robot cell.

Pricing and Availability

No price is shown on this page. Quotation is the way to proceed: tell us the parts you weld and the volumes you expect, and we will prepare an offer for the kit. Delivery, customs and support are arranged with the quotation. The SIASUN Xinsong Thin Plate Welding Machine System is available on this page.

Frequently Asked Questions

Which robot models come with the thin plate system?

The thin plate solution lists the SR12A-12/1.46 and SR25A-12/2.01 robots. Tell us about your parts when you request your quotation and we will discuss which one fits.

Which welding machine does the kit use?

The kit uses the Aotai MAG-350Pro RII-Plus welding machine.

Which torches are listed?

The listed torches are the Loyee GL350N-HDA, TRM 352P and ARH6350.

What kind of welding is it for?

The application area is arc welding. The kit is for thin sheet, with a soft arc, small spatter, low heat input and strong bridging ability.

Where do I find payload, reach and current range?

Those details are requested together with your quotation, so ask for them in your request.

Is there a version for thicker material?

Yes. The welding kit system also includes a medium and thick plate solution for thick sheet, and an ultra-low spatter solution.

Where can I buy the SIASUN Xinsong Thin Plate Welding Machine System and what does it cost?

It is available through this page, by quotation. No price is shown here; send your request and we will prepare an offer.

Summary

Thin sheet leaves little room for error, and this kit is built around that fact. An SR-series robot, an Aotai MAG-350Pro RII-Plus welding machine and a Loyee torch are matched into one arc-welding solution, with a soft arc, small spatter, low heat input and strong bridging ability. If thin sheet is your daily work, this page is the starting point.