SIASUN Grinding robotic solution (Grinding robotic solution)

A robot that grinds is only as good as its sense of touch. The SIASUN Grinding robotic solution (Grinding robotic solution) answers that with force-controlled tools, a process software package and a safety module, all delivered as one kit system rather than a loose collection of parts.

The product is available through this page, by quotation.

Background

SIASUN and its robot lineage

SIASUN is a robotics brand whose range spans industrial robots and integrated robotic product solutions for factory work. The SR series robots that carry this grinding system belong to that industrial family, and the same brand also offers solutions for arc welding, laser welding and spot welding. Buyers who already know SIASUN equipment from other lines will recognize the approach: a robot, a purpose-built tool and the software to tie them together, sold as one working package.

For readers who want the wider context, the Industrial Robots category shows where the SR series sits among the brand's other arms.

An integrated kit system for grinding and polishing

The SIASUN grinding kit system is based on an integrated intelligent design. It covers lightweight, medium, heavy and surface polishing kits, so one product family reaches from delicate finishing to demanding material removal. The SR series robots are equipped with a series of grinding tools and can be freely configured according to the grinding scene. In practice that means the workshop starts from the job in front of it and chooses the tool and robot combination to suit.

The system is equipped with SIASUN's independent intellectual property rights intelligent grinding and polishing process software package. The software, together with the tooling, gives the system the characteristics of high rigidity and high precision. A dedicated polishing process package is also included to improve workmanship, which matters most where the finished surface is judged by eye and by hand.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation. The manufacturer has not published the dimensions, the weight, the robot payload within the kit, the power supply, the repeatability, the force control range, the communication interfaces, what is in the box, the IP rating or the grinding tool speed; they are confirmed at quotation.

What makes force-controlled tooling different from a fixed-path robot?

A conventional robot repeats a taught path exactly. That is a strength for welding or pick-and-place, but grinding is different, because the workpiece is never exactly where the program expects it to be. Castings bulge, weld seams dip and forged parts vary from one piece to the next. A tool that cannot respond will cut too deep in one place and miss the surface in another.

Every version of this kit system uses a force-controlled tool, which is the core of the answer. The tool is built to hold contact with the work rather than only follow coordinates. Combined with the intelligent grinding and polishing process software package, the system aims at the high rigidity and high precision the manufacturer describes. The result is a finish that depends less on the operator's stamina and more on a process that can be set once and repeated.

Equally important is the safety module. It provides dual protection for product and personnel safety, which means the same system that guards the operator also guards the part being worked on. For a workshop moving people away from dusty, noisy and repetitive tasks, that pairing is a practical benefit and not just a compliance item.

How do the three kit versions differ?

The versions are separated by tool type and by the grinding scenario each is meant for. Their figures stay with their own version.

The SR25A-35/1.80 kit system carries a single-head force-controlled tool and is meant for light-duty application. It is the simplest configuration, suited to a workshop that wants to begin automated finishing with a modest, clearly defined task.

The SR25A-25/1.80 kit system carries an independent three-head force-controlled tool and is meant for surface polishing application. Its tool layout points to work where the quality of the surface is the goal and not the amount of material removed.

The SR50A-70/2.15 kit system carries a dual-head force-controlled tool and is meant for medium- to heavy-duty application. It is the version to consider when the job involves more demanding grinding than the other two configurations are described for.

The manufacturer does not publish the payload, force range or tool speed for these kits, so a comparison beyond tool type and scenario is made at quotation, not guessed from the page.

Who is the SIASUN Grinding robotic solution for?

The first group is the metalworking shop that finishes castings, forgings or fabricated parts by hand and wants consistent results without depending on a few skilled operators. For light finishing the single-head SR25A-35/1.80 kit system is the natural place to start, while the SR50A-70/2.15 kit system is the version for heavier removal work.

The second group is the manufacturer whose product is judged by its surface, where polishing quality decides whether a part is accepted. The SR25A-25/1.80 kit system, with its three-head tool and surface polishing scenario, is aimed at that need.

The third group is the system integrator or plant engineer who values easy deployment, high integration and flexible configuration. Offline programming software and a fast programming plug-in let the team prepare work away from the cell, and the manufacturer says this doubles the efficiency of programming.

Welding shops that arrived here by mistake may prefer the SIASUN Arc welding robotic solution, which belongs to the same brand family but serves a different process.

What is the SIASUN Grinding robotic solution used for?

1. Grinding: removing excess material and smoothing workpieces with a force-controlled tool.
2. Polishing: improving the finish of visible surfaces with the dedicated polishing process package.
3. Light-duty finishing: handling lighter tasks with the single-head tool of the SR25A-35/1.80 kit system.
4. Medium to heavy grinding: tackling heavier work with the dual-head tool of the SR50A-70/2.15 kit system.
5. Surface polishing: treating surfaces with the three-head tool of the SR25A-25/1.80 kit system.
6. Offline-programmed production: preparing grinding programs away from the cell, then running them with the safety module protecting product and personnel.

Pricing and Availability

No price is shown on this page, because each kit system is configured to the grinding scene and quoted accordingly. Quotation is the way to proceed: tell us the workpiece, the finish you need and the version you have in mind. Delivery, customs and support are arranged with the quotation. The SIASUN Grinding robotic solution is available on this page.

Frequently Asked Questions

What is the SIASUN Grinding robotic solution?

It is a grinding kit system based on an integrated intelligent design. It pairs SR series robots with force-controlled grinding tools and a dedicated process software package.

Which versions are available?

Three versions are named: the SR25A-25/1.80 kit system, the SR25A-35/1.80 kit system and the SR50A-70/2.15 kit system. Each has its own tool type and grinding scenario.

Which version suits light-duty work?

The SR25A-35/1.80 kit system, which has a single-head force-controlled tool and is meant for light-duty application.

Which version suits heavier grinding?

The SR50A-70/2.15 kit system, with a dual-head force-controlled tool, is meant for medium- to heavy-duty application.

How is the system programmed?

It uses offline programming software and a fast programming plug-in. The manufacturer states that this doubles the efficiency of programming.

Does the system include safety features?

Yes. It is equipped with a safety module that provides dual protection for product and personnel safety.

Where can I buy the SIASUN Grinding robotic solution and what does it cost?

It is available through this page, by quotation. No price is published here; send your requirements and we will prepare a quotation that covers the version you need.

Summary

Grinding asks a robot to do something harder than repeat a path: it must meet the surface as it really is. The SIASUN Grinding robotic solution responds with force-controlled tools in single-head, dual-head and three-head forms, an intelligent process software package, offline programming and a safety module. Three versions let a buyer match the tool to the job, from light-duty and surface polishing to medium- to heavy-duty work. To request a quotation for the version that fits your workshop, this page is the starting point.