SIASUN Arc welding robotic solution (Arc welding robotic solution)

A good weld is a quiet thing: a soft arc, a bead that looks the same on the hundredth part as on the first, and almost nothing to grind away afterward. The SIASUN Arc welding robotic solution (Arc welding robotic solution) is built around that idea, treating the robot, the power source, the torch and the process software as one welding system rather than four purchases.

This solution is available through this page, by quotation.

Background

SIASUN and the SR series

SIASUN is a robotics brand whose range spans industrial robots, welding cells and other integrated robotic product solutions. Within that range, the SR series robot is the arm at the center of this welding kit. The arm is paired with an intelligent welding control system and digital welding equipment, so that the cell is designed together from the start.

For a fabrication shop in the Caribbean, that lineage matters in a practical way. A single supplier line for the robot, the welding package and the process software means fewer places where a mismatch can hide, and a clearer path when a question needs answering.

One system, three solutions

The SIASUN welding kit system comes in three solutions: thin plate, medium and thick plate, and ultra-low spatter. Each is centered on the SR series robot, equipped with an intelligent welding control system, integrated with digital welding equipment, and delivered as an integrated design intended to make welding operations easier, more precise and more efficient.

Two further ideas run through the system. The first is configuration: high-performance supporting equipment and the integrated design improve efficiency. The second is software: the package is tailored to the application and integrated with an intelligent arc welding process software package, so the welding knowledge is part of the system rather than something typed in by hand on the shop floor.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the robot payload, the robot reach, the power requirements, the dimensions, the weight, the contents of the box, the welding current range, the wire diameter compatibility, the IP rating or the controller model; they are confirmed at quotation.

What makes the arc in this solution different?

Most buyers compare welding robots by the arm. The more telling comparison is what happens at the tip of the wire. SIASUN describes the arc in this solution as soft, with small spatter that has little adhesion, smooth droplet transfer, low heat input and strong bridging ability.

Each of those traits answers a shop-floor problem. Small, low-adhesion spatter means less time spent cleaning parts and fixtures after the weld. Smooth droplet transfer and high arc stability support strong welding consistency, which in turn produces more attractive weld bead profiles. Low heat input is the trait fabricators look for when working on lighter material, and strong bridging ability helps when a joint is not presented perfectly.

The ultra-low spatter solution is named for exactly this behavior, so a shop where cleanup and finishing consume the most labor has a clear reason to ask about it first.

How do the three solutions differ?

The names of the three solutions point to the kind of work each is meant for. The thin plate solution is the one with named equipment: the SR12A-12/1.46 or SR25A-12/2.01 robot, the Aotai MAG-350Pro RII-Plus welding machine, and a torch from the Loyee GL350N-HDA, TRM 352P or ARH6350 list.

The medium and thick plate solution and the ultra-low spatter solution share the same architecture: an SR series robot, an intelligent welding control system, digital welding equipment and an integrated design. The thin plate equipment belongs to the thin plate solution only. When you request a quotation, state the plate thickness range and the finish you need, and we respond with the matching configuration.

Who is the SIASUN Arc welding robotic solution for?

Metal fabrication shops that weld the same families of parts again and again are the natural buyers. Manual welders are scarce and hard to train in many markets, and a robotic cell lets a shop hold quality steady across shifts without depending on one skilled person.

Contract manufacturers will value the process software package, since it brings welding parameters into the system instead of leaving them to individual habit. Shops that fabricate structures, frames, enclosures or equipment bases can match the thin plate, medium and thick plate, or ultra-low spatter solution to their material. Plants that lose hours to spatter cleanup are the clearest candidates for the ultra-low spatter option.

If your work is not arc welding, a different tool may fit better. For seam work that calls for a laser process, see the SIASUN Laser welding robotic solution; for joining sheet metal by points, the SIASUN Spot welding solution is the relevant page; and for finishing the welded part, the SIASUN Grinding robotic solution covers that step. You can also browse the wider Welding Robots category and the Industrial Robots category.

What is the SIASUN Arc welding robotic solution used for?

1. Thin plate welding. The thin plate solution pairs an SR series robot with a digital welding machine and a matched torch for lighter material.
2. Medium and thick plate welding. A dedicated solution covers heavier sections, with the same integrated robot, control and welding equipment architecture.
3. Low-spatter production. The ultra-low spatter solution suits work where cleanup and finishing time must stay small.
4. Repeat-part fabrication. The intelligent process software package and stable arc support consistent results from part to part.
5. Visible weld seams. High arc stability and strong welding consistency produce more attractive weld bead profiles where appearance counts.
6. Replacing scarce manual welding. An integrated cell lets a shop keep output steady when skilled welders are hard to find.

Pricing and Availability

We do not print prices on this page. A quotation is the way to proceed: tell us the plate thickness, the parts and the finish you need, and we respond with the matching solution. Delivery, customs and support are arranged together with the quotation. The SIASUN Arc welding robotic solution is available on this page.

Frequently Asked Questions

What does the SIASUN Arc welding robotic solution include?

It is centered around the SR series robot, with an intelligent welding control system, digital welding equipment and an intelligent arc welding process software package, all in an integrated design.

How many versions are there?

There are three solutions: thin plate, medium and thick plate, and ultra-low spatter.

Which robots are used in the thin plate solution?

The thin plate solution uses the SR12A-12/1.46 or the SR25A-12/2.01 robot, with the Aotai MAG-350Pro RII-Plus welding machine.

Which torches are used with the thin plate solution?

The thin plate solution is fitted with the Loyee GL350N-HDA, the TRM 352P or the ARH6350.

What are the arc characteristics?

The arc is soft, the spatter is small with little adhesion, droplet transfer is smooth, heat input is low and bridging ability is strong. High arc stability and strong welding consistency give more attractive weld bead profiles.

What process is this solution made for?

It is made for arc welding, with an intelligent arc welding process software package tailored to the application.

Where can I buy the SIASUN Arc welding robotic solution and what does it cost?

It is available through this page, by quotation. Tell us the solution and configuration you need and we respond with a quotation rather than a figure printed here.

Summary

A weld is only as good as the system behind the arc. The SIASUN Arc welding robotic solution joins an SR series robot, digital welding equipment, intelligent control and process software into one design, with a soft, stable, low-spatter arc as the result. Three solutions cover thin plate, medium and thick plate, and ultra-low spatter work. To discuss which one fits your parts, this page is the starting point.