SEER Robotics AMB-1000JS & AMB-500JS (AMB-1000JS & AMB-500JS)
In stock
- BRAND:
- SEER ROBOTICS
- MODEL:
- AMB-1000JS & AMB-500JS
- PART #:
- AMB-1000JS & AMB-500JS
- ORIGIN:
- China
- Warranty:
- 12 MONTHS
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- SEER-Robotics-AMB-1000JS-AMB-500JS
SEER Robotics AMB-1000JS & AMB-500JS (AMB-1000JS & AMB-500JS)
A rack of goods that weighs as much as a small car still has to move through a busy aisle without a person pushing it. The SEER Robotics AMB-1000JS & AMB-500JS (AMB-1000JS & AMB-500JS) is built for that job. It is a latent jack-up handling robot that drives underneath a material rack, lifts it and carries it to where it is needed, guided by laser SLAM.
This product is available through this page, by quotation.
Background
Seer Robotics and where this robot comes from
Seer Robotics describes itself as a pioneering company in intelligent manufacturing and smart logistics. It was established in 2015 and has its headquarters in Shanghai, China. The company works in mobile robots for factories and warehouses, and its range covers lifting robots, forklift-type machines and other handling platforms.
The AMB-JS line is the heavy-duty end of the jacking robots described here. The maker calls it a safety jacking car, and the word safety is deliberate. All safety features of the AMB-1000JS are designed according to the ISO 13849-1 standard, and the product has passed CE certification, including the MD Mechanical Safety Directive, the RED Radio Safety Directive and the EMC Electromagnetic Safety Directive.
Latent jack-up design and laser SLAM
A latent jack-up robot is a low, flat vehicle. It slides beneath a rack, rises a short distance to take the weight and then drives away with the rack on its back. Because the robot hides under the load, the rack itself does not need a motor or a drive system of its own. Any rack the robot can identify and lift becomes a mobile unit.
The AMB-JS is based on laser SLAM, which means the robot builds and uses a map of its surroundings from laser scans instead of following tape or magnets on the floor. It identifies various material racks correctly and jacks up the goods racks. SLAM positioning on the AMB-1000JS is accurate to ±5 mm without reflections, and safety scanning is handled by 2 SICK nanoscan3 Core lasers.
Technical Specifications
| Specification | AMB-1000JS | AMB-500JS |
|---|---|---|
| Robot type | Latent jack-up safety-type handling robot, laser SLAM | Latent jack-up safety-type handling robot, laser SLAM |
| Maximum load capacity | 1000 kg | — |
| Dimensions (L x W x H) | 1330 x 952 x 290 mm | 1330 x 952 x 290 mm |
| Weight (with battery) | 265 kg | 265 kg |
| Maximum swing diameter | 1460 mm | — |
| Driving speed | ≤1.5 m/s | — |
| Minimum aisle width | 1050 mm | — |
| Maximum lifting height | 60±1 mm | — |
| Battery | 48 V / 40 Ah, lithium iron phosphate | — |
| Comprehensive battery life | 7 h | — |
| Positioning accuracy | ±5 mm without reflections | — |
| Safety lasers | 2 SICK nanoscan3 Core lasers | — |
| Noise | ≤75 dB(A), in accordance with EN12053 | — |
| Wired network | Two RJ45 Gigabit networks | — |
| Charging equipment supplied | Manual charger / automatic charging post (one piece or two pieces) | — |
Specifications as published by the manufacturer; confirmed against the datasheet at quotation.
The manufacturer has not published the IP rating, the operating temperature range, the payload dimensions of the rack or the service life independent of warranty; they are confirmed at quotation.
What is the difference between the AMB-1000JS and the AMB-500JS?
The two names describe one platform in two load classes: the safety jacking car carries 500 kg or 1000 kg, and the model numbers point to those two classes. The dimensions and the weight with battery are the same for both versions: 1330 x 952 x 290 mm and 265 kg. In practice, the choice between them is about the rack and the goods you load on it, not about the footprint of the robot in your aisles.
The detailed operating figures, such as speed, lifting height, battery and noise, belong to the AMB-1000JS. We do not transfer them to the AMB-500JS. If you plan around the lighter version, ask for its own figures when you request a quotation.
How does the AMB-1000JS keep people and goods safe?
Safety is the theme of this robot. The AMB-1000JS carries 2 SICK nanoscan3 Core lasers, and its safety functions are designed according to ISO 13849-1. The CE certification covers the machinery, radio and electromagnetic directives, which matters to any buyer who has to document equipment before it enters a facility.
Noise stays at ≤75 dB(A), in accordance with EN12053, which helps in workplaces where robots share space with staff for a whole shift. Positioning is accurate to ±5 mm without reflections, so racks can be set down where the layout expects them.
One limit is plain: the AMB-1000JS is designed for indoor transport only and is not recommended for outdoor environments. Plan routes inside buildings.
Who is the AMB-1000JS & AMB-500JS for?
Warehouse and distribution operators who move loaded racks between storage and picking or packing areas will find the jack-up format a natural fit. Factories that carry racks of components or finished goods between lines and stores can use it in the same way. Integrators who build automated material flow for a client can treat it as a standard carrier for racks.
Choose the AMB-1000JS class when racks are heavy and the full 1000 kg capacity is needed, and the AMB-500JS class when the loads are lighter. For other formats, compare the AMB-150, the AMB-300 or the AMB-300XS. For pallet work, the SlimStack 2000 Two Ton Autonomous Forklift is a different kind of machine. The wider range is listed under Lifting Robots.
What is the AMB-1000JS & AMB-500JS used for?
- Rack transport in warehouses: carrying goods racks from storage zones to picking stations without manual pushing.
- Line-side supply in factories: bringing racks of parts to production lines and taking empty or finished racks away.
- Heavy rack movement: moving racks in the 1000 kg class where lighter robots would not suffice.
- Shared workspaces: operating among staff, with laser safeguarding and a low noise level.
- Tight aisles: working in aisles as narrow as 1050 mm with the AMB-1000JS.
- Automated charging cycles: returning to a charging post, where one is supplied, so that routes continue through the shift.
Pricing and Availability
We do not print prices on this page. Please request a quotation, and tell us the load class, the racks you use and the layout where the robot will work. Delivery, customs and support are arranged together with the quotation. The AMB-1000JS & AMB-500JS is available on this page.
Frequently Asked Questions
What load can the robot carry?
The safety jacking car has a load capacity of 500 kg or 1000 kg. The AMB-1000JS has a maximum load capacity of 1000 kg.
How big is the robot?
The dimensions are 1330 x 952 x 290 mm, and the weight with battery is 265 kg. These figures apply to both the AMB-1000JS and the AMB-500JS.
How fast does the AMB-1000JS drive and how high does it lift?
Driving speed is ≤1.5 m/s and the maximum lifting height is 60±1 mm. The minimum aisle width is 1050 mm and the maximum swing diameter is 1460 mm.
How long does the battery last?
The AMB-1000JS has a 48 V / 40 Ah lithium iron phosphate battery and a comprehensive battery life of 7 h. It comes with a manual charger or an automatic charging post, in one or two pieces.
Can it be used outdoors?
No. The AMB-1000JS is designed for indoor transport only and is not recommended for outdoor environments.
Which certifications does it hold?
The AMB-1000JS has passed CE certification, including the MD, RED and EMC directives. Its safety features are designed according to ISO 13849-1.
Where can I buy the AMB-1000JS & AMB-500JS and what does it cost?
You can buy it through this page, by quotation. We do not print a price here; send us your requirements and we will prepare a quotation.
Summary
The AMB-1000JS & AMB-500JS answers a simple question: how do you move heavy racks without anyone pushing them? It does so with a low jack-up body, laser SLAM and a safety design built around ISO 13849-1 and CE certification. Both versions share the same footprint and weight, and the AMB-1000JS carries the full set of operating figures. For a quotation on either version, this page is the starting point.
