XAG B141050 Smart Super Charge Battery (09-017-00083)
In stock
- BRAND:
- XAG
- PART #:
- 09-017-00083
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- XAG-09-017-00083
XAG B141050 Smart Super Charge Battery (09-017-00083)
In a spraying season, the hours that matter are not the ones in the air but the ones spent waiting beside the charger. The XAG B141050 Smart Super Charge Battery (09-017-00083) is built around that problem: a lithium-ion polymer pack designed so that the pause between one sortie and the next stays short.
The product is available through this page, by quotation.
Background
XAG and its agricultural roots
XAG describes itself as an agricultural robotics company dedicated to making farming more efficient, sustainable and rewarding. That mission shapes how its hardware is designed. Equipment for the field is judged by uptime, by how quickly a crew can get back to work, and by how well it holds up season after season. A battery in that setting is not an accessory. It sets the rhythm of the whole working day.
The sources name three versions of this battery family: B141050 (INTL), B13970S and B13960S. Only the B141050 is covered by the figures on this page, and every figure below belongs to it alone. The other two are not described here.
The SuperCharge approach
The B141050 is a Smart Super Charge battery, meaning it is meant to be used as part of a charging system rather than as a stand-alone pack. Its rated output is 52.5 V/140 A, and it accepts a maximum charging current of 120 A. That combination of high output and high charge acceptance is what makes short turnaround possible.
The matching charger is the XAG CM13600S Charger (09-017-00069). Used with it, the battery charges from 30% to 95% in approximately 12 minutes, or from 15% to 95% in about 15 minutes. With XAG's parallel charging cable, the times drop further, to about 7 minutes from 30% to 95% and about 9 minutes from 15% to 95%. Battery packs of this type belong in the Robot Batteries category, and the machines they serve are found under Agricultural Robots.
Technical Specifications
| Specification | Value |
|---|---|
| Model | M1PPA141050AH |
| Type | Lithium-ion polymer battery |
| Rated capacity | 20000 mAh |
| Energy | 1050 Wh |
| Rated output | 52.5 V/140 A |
| Maximum charging current | 120 A |
| Charging ambient temperature | 10 ~ 45 ℃ |
| Cycle life | Up to 1500 cycles |
| IP rating | IP65 |
| Charging time with XAG parallel charging cable | About 7 minutes (30% to 95%) or 9 minutes (15% to 95%) |
| Charging time with CM13600S charger | Approximately 12 minutes (30% to 95%) or about 15 minutes (15% to 95%) |
Specifications as published by the manufacturer; confirmed against the datasheet at quotation.
The manufacturer has not published the weight, the dimensions, the storage temperature, the battery operating temperature, the cell configuration or the contents of the box; they are confirmed at quotation.
What makes the B141050 different from an ordinary drone battery?
The first difference is the charge window. Many packs are designed for a slow, careful overnight top-up. The B141050 is designed for the opposite routine: land, swap, charge, and fly again within minutes. A 120 A maximum charging current against a 20000 mAh pack is what allows a 30% to 95% charge in approximately 12 minutes on the CM13600S, and in about 7 minutes with the parallel charging cable.
The second difference is endurance of the pack itself. A cycle life of up to 1500 cycles matters because fast charging is exactly the use that wears batteries quickly. A crew that charges several times a day will count the number of cycles in the pack before it counts anything else, and a figure like this lets an operator plan replacement over several seasons rather than a few weeks.
The third is the rated output of 52.5 V/140 A. That is the current the pack can deliver to the machine it powers, and it is the figure to check against the requirements of your equipment. The IP65 rating also speaks to field use, where dust and spray are part of the day.
How fast does the B141050 charge, and what do I need for it?
There are two routes. The standard route is the XAG CM13600S Charger (09-017-00069), which takes the battery from 30% to 95% in approximately 12 minutes, or from 15% to 95% in about 15 minutes. The faster route adds XAG's parallel charging cable, which brings the same ranges down to about 7 minutes and 9 minutes.
Charging ambient temperature is stated as 10 ~ 45 ℃, so the charging area should be planned inside that range. In a hot climate, a shaded or ventilated charging point is worth considering.
Who is the XAG B141050 Smart Super Charge Battery for?
It suits commercial operators who treat charging time as a cost. A spraying contractor covering large acreage in a short weather window gains the most, because every minute saved at the charger is a minute available for work. Farms that run several machines and want a common power system will also find the SuperCharge approach straightforward to plan around.
It also suits fleet managers and equipment dealers who are replacing or adding packs to an existing XAG setup and need exact electrical figures: rated capacity, rated output, charging current and cycle life. If you are unsure which of the three named versions, B141050 (INTL), B13970S or B13960S, fits your equipment, send the machine details with your request and we will advise on the right pack.
It is less suited to occasional users who fly a few times a month. For them, fast charging offers little advantage, and a simpler pack may serve as well.
What is the XAG B141050 Smart Super Charge Battery used for?
- Powering agricultural robots. The pack supplies 52.5 V/140 A to field machines built for crop care.
- Rapid turnaround between sorties. Charging from 30% to 95% in approximately 12 minutes on the CM13600S keeps the work moving.
- Parallel charging for peak days. With XAG's parallel charging cable, charging from 30% to 95% takes about 7 minutes.
- Multi-battery rotation. Operators can cycle several packs through the charging area so one is always ready.
- Long-season operation. A cycle life of up to 1500 cycles supports repeated daily use.
- Work in dusty or wet field conditions. The IP65 rating suits outdoor handling.
Pricing and Availability
We do not publish prices on this page. Quotation is the way to buy: send us your request, and we will respond with a quotation for your quantity and destination. Delivery, customs and support are arranged with the quotation. The B141050 is available on this page.
Frequently Asked Questions
What is the capacity of the B141050?
The rated capacity is 20000 mAh, and the energy is 1050 Wh.
What is the rated output?
The rated output is 52.5 V/140 A. The maximum charging current is 120 A.
How long does it take to charge?
With the CM13600S charger, it takes approximately 12 minutes from 30% to 95%, or about 15 minutes from 15% to 95%. With XAG's parallel charging cable, it takes about 7 minutes and 9 minutes for the same ranges.
How many charge cycles can it deliver?
The cycle life is up to 1500 cycles.
At what temperature can it be charged?
The charging ambient temperature is 10 ~ 45 ℃.
Which charger goes with this battery?
The XAG CM13600S Charger is the charger used for the standard charging times above. Adding XAG's parallel charging cable shortens them.
Where can I buy the XAG B141050 Smart Super Charge Battery and what does it cost?
You can buy it through this page by requesting a quotation. The cost depends on quantity and destination, and it is given in the quotation itself.
Summary
The B141050 answers the question of what a working day looks like when the charger is no longer the bottleneck. A 20000 mAh, 1050 Wh pack with 52.5 V/140 A output, a 120 A maximum charging current and a cycle life of up to 1500 cycles is built for crews who measure their day in sorties, not hours of waiting. Pair it with the CM13600S charger and add the parallel charging cable when time is tight. For anyone who wants the battery that keeps the work moving, this page is the starting point.
