SIASUN Cantilever Shaft Conveyor Mobile Robot (Cantilever Shaft Conveyor Mobile Robot)

A battery plant moves on its handoffs. Every pallet that waits at the end of a conveyor for a person, a forklift or a free slot is time the line does not get back. The SIASUN Cantilever Shaft Conveyor Mobile Robot is built for that moment: a mobile base with its own roller or chain conveyor that drives up to a floor line, lines up with it and moves the load on without a human in the loop.

The product is available through this page, by quotation.

Background

SIASUN and its mobile robot solutions

SIASUN supplies mobile robot solutions for factories and production logistics, and this robot sits inside that family. The solutions run on the IMRS 2.0 platform, which covers multi-robot dispatching, route optimization, data analytics and digital twins for end-to-end intelligent control. In practice that means the robot is one working member of a fleet that is scheduled and watched from a single platform, not a standalone machine with its own private routine.

Other robots in the same family are built for much heavier work. If you are comparing options, the Mobile Robots category shows the wider range, and the Factory Robots category places it among other equipment for production floors.

Positioning and key technology

The robot is a high-efficiency material transfer platform. It is built on an AGV base and integrated with roller or chain conveyors, so it docks precisely with floor conveyor lines and handles palletized loads. Four design choices define it.

• Conveyor on board. The roller or chain conveyor is part of the robot, so the load passes straight from the floor line onto the vehicle and back again.
• Cantilever shaft load handling. This is the handling method of the platform, and it gives the robot its name.
• Electric lead screw lifting. The lifting mechanism raises the conveyor through a range of 750-1800 mm, so the robot can meet lines set at different heights.
• Multi-navigation fusion. Several navigation sources are combined to achieve millimeter-level alignment when docking.

The robot carries industrial-grade reliability for long-term 24/7 running, which matters in plants that do not stop between shifts.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the navigation method, the positioning accuracy, the docking accuracy, the battery type and capacity, the charging method, the travel speed, the dimensions, the safety sensors, the IP rating or the conveyor load size; they are confirmed at quotation.

What makes a conveyor mobile robot different from a plain AGV?

A plain AGV carries a load from one point to another and usually needs a separate device, or a person, to put the load on and take it off. This robot carries its own conveyor, so the transfer itself is automated. It drives to a floor conveyor line, docks, and the load moves between the line and the robot on rollers or chain. The pallet is never lifted by a forklift and never waits for a helper.

The electric lead screw adds the second half of the idea. Because the conveyor can be raised across 750-1800 mm, the robot does not depend on every line in the plant sitting at one height. That is useful in a facility that has grown over time and has stations at different levels.

The third part is alignment. A conveyor transfer only works when the two conveyors meet cleanly. Multi-navigation fusion with millimeter-level alignment is the capability that turns a moving platform into a dependable link between two fixed lines.

How does the IMRS 2.0 platform fit in?

One robot solves one handoff. A plant with many handoffs needs to decide which robot goes where, in which order and by which route. The IMRS 2.0 platform handles multi-robot dispatching and route optimization, and adds data analytics and digital twins for end-to-end intelligent control.

If you are planning a larger system and want to see how simulation fits in, the SIASUN Mobile Robot Digital Twin System is listed on this site. Which parts of the platform come with this robot is settled with the quotation.

Who is the SIASUN Cantilever Shaft Conveyor Mobile Robot for?

The clearest fit is the lithium battery manufacturer. The robot supports intralogistics from electrode fabrication and cell assembly through to module and PACK processes. A plant that runs those stages in sequence, with conveyor lines at each, has exactly the repeated floor-line-to-floor-line transfers this robot is made for.

Production engineers in other process-driven factories will also recognize the pattern. Where palletized loads travel between conveyor lines and the work runs around the clock, a robot built for 24/7 operation and fixed-line docking is a sensible candidate.

Integrators and automation planners are a third group. They can use the lifting range, payload and drive mode to judge whether the platform suits a design, then settle the remaining details with us.

Buyers whose loads exceed the 1000 kg rated payload should look at the heavier robots in the family, such as the SIASUN 3T Heavy-Duty Mobile Robot or the SIASUN 5T Heavy-Duty Mobile Robot. Those are different machines, and their figures are not carried over to this one.

What is the SIASUN Cantilever Shaft Conveyor Mobile Robot used for?

1. Electrode fabrication transfers. Moving materials between conveyor stations in the early stage of lithium battery production.
2. Cell assembly logistics. Linking assembly stations so that pallets flow from one to the next without manual handling.
3. Module and PACK supply. Carrying loads between conveyor lines in the later module and PACK stages.
4. Floor conveyor line docking. Meeting a fixed line with millimeter-level alignment and passing palletized loads across.
5. Height-adjusted handoffs. Using the electric lead screw to serve lines set anywhere in the 750-1800 mm range.
6. Round-the-clock production flow. Running as part of a dispatched fleet on a 24/7 schedule, supported by the IMRS 2.0 platform.

Pricing and Availability

This robot is sold by quotation. The configuration and the scope of the software platform are agreed with you in the quotation. Delivery, customs and support are arranged with the quotation as well, so you receive one clear picture of what is supplied and how it reaches your site. Send us your line layout, load type and operating hours, and the product is available on this page.

Frequently Asked Questions

What payload can the robot carry?

The rated payload is ≤1000 kg. Palletized loads are the intended use.

How high can the conveyor be lifted?

The lifting height is 750-1800 mm, provided by an electric lead screw mechanism.

How does the robot move?

The drive mode is dual-wheel differential / steering wheel. Ask for travel speed when you request your quotation.

How precisely does it dock with a conveyor line?

It uses multi-navigation fusion for millimeter-level alignment with the floor line.

Is it suitable for continuous operation?

Yes, it is built with industrial-grade reliability for long-term 24/7 running. Ask about the battery and charging arrangement when you request your quotation.

Can it work together with other robots?

Yes. SIASUN mobile robot solutions run on the IMRS 2.0 platform, which provides multi-robot dispatching, route optimization, data analytics and digital twins.

Where can I buy the SIASUN Cantilever Shaft Conveyor Mobile Robot and what does it cost?

You can request it through this page. It is sold by quotation, so the cost is given in your quotation once your configuration and requirements are clear.

Summary

The SIASUN Cantilever Shaft Conveyor Mobile Robot answers the problem of the waiting pallet. It brings its own conveyor, adjusts its height across 750-1800 mm, carries up to 1000 kg and aligns with floor lines to the millimeter, so the handoff between two fixed lines no longer needs a person. Its place is in lithium battery plants and similar process-driven factories, backed by the IMRS 2.0 platform for fleet control. Open points such as speed, dimensions and battery details are settled with the quotation, and this page is the starting point.