SIASUN 10,000 Kg Heavy-Duty Mobile Robot

Ten tonnes is a load that most factory floors treat with respect, and most vehicles treat with caution. The SIASUN 10,000 Kg Heavy-Duty Mobile Robot is built for the moment when the load is that heavy but the aisle is still tight, and when the work calls for a machine that can turn on the spot instead of swinging wide.

The SIASUN 10,000 Kg Heavy-Duty Mobile Robot is available through this page, by quotation.

Background

SIASUN and its heavy-duty lineage

SIASUN has been developing and investing in heavy-duty mobile robots since 2009. That is a long time in a field where many suppliers arrived only when automated transport became fashionable. The company's heavy-duty work grew out of a practical observation: in heavy industry, the loads that are hardest to move are often the ones that matter most to the production schedule, and conventional handling for them depends on cranes, rigging and careful human supervision.

Over the years this work has produced a family of heavy-duty mobile robots covering 3 to 120 t of capacity. The family is organized by load class. The 3T and 5T models sit at the lighter end, while the 20T, 30T, 60T and 80T models carry progressively heavier loads. The 10T model, the subject of this page, sits in the middle of that range.

Positioning and key technology of the 10T model

The 10T robot is a platform-style carrier for very heavy loads. Its rated payload is 10 t, and it has a lifting height of 100 mm, which is the stroke used to pick a load up off its support and set it down again. For positioning it offers an accuracy of ±10 mm.

Across the series, SIASUN describes an optimized wheelset that balances load capacity and traction while protecting the floor, which matters when a building's floor is itself part of the investment. The series also supports omnidirectional movement with zero turning radius. In practice, this means the robot can reposition a long or awkward load in confined space without the large turning arcs that fixed-steer vehicles need.

Navigation on the 10T can be SLAM, magnetic guidance or color-tape guidance. That gives a plant a choice between a route that follows a physical guide on the floor and a route that relies on the robot's own mapping of its surroundings.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the dimensions, the weight, the travel speed, the battery type and capacity, the operating time, the charging method, the IP rating, the drive configuration, the package contents or the operating temperature range; they are confirmed at quotation.

What makes the 10T robot different from the lighter and heavier versions?

The main difference is the load class. The series covers 3 to 120 t, and each model is sized for a band of that range. The 10T robot carries 10 t. Choose it when your heaviest regular load sits near that figure, and you want the machine to be matched to the job instead of oversized for it.

A robot with far more capacity than the task needs is not automatically the safer choice. A heavier platform is a larger investment, and it may ask more of your floor and your aisles. The reverse is equally true: a platform near its limit leaves no margin for the day a heavier fixture arrives. Right-sizing is the sensible discipline, and the neighboring models make it possible. If your loads are lighter, the SIASUN 5T Heavy-Duty Mobile Robot is worth a look. If they are heavier, the SIASUN 20T Heavy-Duty Mobile Robot is the next step up.

What the models share is as important as what separates them. The series is described as supporting both multi-robot coordination and standalone operation, so a plant can begin with a single unit and later add more robots that work together on very large or long loads. The wheelset and the zero-turning-radius movement are described for the series as a whole, so the handling approach is familiar when you move between sizes.

How does the 10T robot find its way around the plant?

The robot offers three navigation methods: SLAM, magnetic guidance and color-tape guidance. Each suits a different kind of site.

Magnetic guidance and color-tape guidance both rely on a physical path laid into or onto the floor. They suit repeatable, fixed routes, such as a transfer between two stations on a production line. They are easy to understand on the shop floor, and a path can be changed by moving the guide. SLAM, short for simultaneous localization and mapping, lets the robot work out where it is from its surroundings. It is the natural choice where routes change or where laying a guide on the floor is awkward.

Whatever method is chosen, the robot is specified with a positioning accuracy of ±10 mm. For safety, it carries an emergency stop, an audible and visual alarm, and non-contact collision avoidance. That last item matters in a working plant: the robot is designed to react to an obstacle without having to touch it. Its gradeability is 3%, which tells you it is meant for floors that are essentially level, with only gentle slopes such as ramps between building areas.

Who is the SIASUN 10,000 Kg Heavy-Duty Mobile Robot for?

This robot suits plants where very heavy items are moved routinely and the movement needs to be predictable. Typical buyers fall into a few groups.

The first group is heavy manufacturers: automotive and construction machinery plants, aerospace and shipbuilding yards, and steel, metallurgy and heavy industry operations. In these settings, large assemblies and fixtures travel between stations, and a dependable carrier replaces cranes and manual rigging for those moves.

The second group is port and container logistics operators, along with energy and energy storage manufacturers. These are also named application areas for the series. Heavy equipment and large modules need to be transferred in a controlled way, often in spaces where turning room is limited.

The third group is plant planners who are modernizing step by step. The robot can run standalone, so it is a reasonable first unit in an automation program. If your loads are lighter than 10 t, see the 5T model or the 3T model. If they are considerably heavier, the 30T model and the heavier versions in the same range deserve attention. You can compare the whole family on the Heavy Duty Mobile Robots page, and see related equipment under Factory Robots.

What is the SIASUN 10,000 Kg Heavy-Duty Mobile Robot used for?

1. Port and container logistics. Moves heavy equipment and loads through yards and handling areas in a controlled way.
2. New energy and energy storage manufacturing. Carries heavy modules and large components between production stages.
3. Aerospace and shipbuilding. Transfers large, heavy assemblies where positioning to ±10 mm helps with alignment at the next station.
4. Automotive and construction machinery manufacturing. Shifts heavy fixtures, frames and sub-assemblies along the production flow.
5. Steel, metallurgy and heavy industry. Handles heavy material transport in demanding processes, with obstacle crossing and stable travel described for the series.
6. Multi-robot load handling. Works alone or in coordination with other robots from the same series when a load is too large for a single carrier.

Pricing and Availability

This robot is sold by quotation. Send us your load details, your floor and route conditions, and your preferred navigation method, and we will prepare a quotation around them. Delivery, customs and support are arranged with the quotation, so that the whole path from order to commissioning is agreed in one place. The SIASUN 10,000 Kg Heavy-Duty Mobile Robot is available on this page.

Frequently Asked Questions

What payload does the 10T robot carry?

The payload capacity is 10 t. The robot's lifting height is 100 mm.

How accurate is its positioning?

The positioning accuracy is ±10 mm. This is the figure published by the manufacturer for the 10T model.

Which navigation methods are available?

The 10T robot supports SLAM, magnetic guidance and color-tape guidance. Which one is best depends on whether your routes are fixed or change over time.

What safety features does it have?

It is equipped with an emergency stop, an audible and visual alarm, and non-contact collision avoidance.

Can it move sideways or turn in tight spaces?

The SIASUN heavy-duty series supports omnidirectional movement with zero turning radius. That helps when space is limited and a load must be repositioned precisely.

Can several robots work together?

Yes. The series supports multi-robot coordination as well as standalone operation. Tell us about your largest loads when you request a quotation, and we will advise on the arrangement.

Where can I buy the SIASUN 10,000 Kg Heavy-Duty Mobile Robot and what does it cost?

You can request it through this page. The cost is set by quotation, based on your application and delivery needs, so no price is listed here.

Summary

Moving ten tonnes does not have to mean cranes, rigging and a crowd of spotters. The SIASUN 10,000 Kg Heavy-Duty Mobile Robot offers a 10 t payload, a 100 mm lifting height, ±10 mm positioning accuracy, three navigation methods and a built-in set of safety functions, all backed by a company that has worked on heavy-duty mobile robots since 2009. Its zero turning radius lets it work in tight spaces where wider vehicles struggle, and its series-level coordination allows a plant to grow from one unit to a team. The details that are still open, from dimensions to battery data, are settled when the quotation is prepared. If a ten-tonne load is the problem you need to solve, this page is the starting point.