iTR iScrubbot 300 Commercial Floor Scrubber
In stock
- BRAND:
- ITR ROBOT
- MODEL:
- iScrubbot 300
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- ITR-ISCRUBBOT-300
iTR iScrubbot 300 Commercial Floor Scrubber
Most large buildings are cleaned by someone steering a heavy machine across the same hall night after night. The iTR iScrubbot 300 Commercial Floor Scrubber is built around a different idea: the machine takes the route, goes back to charge, and adds and drains its own water, so the crew can spend their hours elsewhere.
The product is available through this page, by quotation.
Background
The brand and the iScrubbot series
The iScrubbot 300 carries the ITR ROBOT brand and belongs to the iScrubbot series of cleaning robots. In the manufacturer's own words, the 300 is a large cleaning robot of that series, designed for hard floor cleaning. The word large matters here. This is not a compact machine for a corridor or a small shop. It is meant for halls, concourses, car parks and warehouse aisles, where the area is wide and the cleaning window is short.
Autonomous scrubbers of this kind have grown popular in airports, hospitals, hotels and logistics sites. Labor is one reason. Consistency is another: a robot follows the same pattern every time and does not tire at the end of a long shift. For businesses in the Caribbean, where hotels, terminals, shopping centers and warehouses often share the same hot, busy conditions, a machine that can work through the night without supervision is a practical proposition.
Positioning and key technology
The iScrubbot 300 combines several cleaning actions in one pass. The manufacturer lists scrubbing, dirt absorption, sterilization, ash reduction and disinfection. Underneath is an integrated site cleaning brush and a sweeping roll brush, so the machine sweeps and washes together instead of needing a separate sweeping run first.
Awareness of the surroundings comes from a multi-sensor fusion design with multi-dimensional environment perception. The manufacturer says this lets the robot respond flexibly to dynamic and static obstacles and keeps people and machine safe together. For the daily routine, the robot starts its task automatically, charges, adds water and drains water on its own, and is designed for 7x24h unattended operation. Maintenance is also considered: the manufacturer describes a system that needs no extra tools, with spare parts that are easy to service.
Technical Specifications
| Specification | iScrubbot 300 |
|---|---|
| Dimensions (L×W×H) | 1.42×1.05×1.5m (56×41×57in) |
| Weight | 350kg (771lb) |
| Cleaning width | 110cm (43in) |
| Max. productivity | 3600m2/h (38750ft²/h) |
| Max. speed | 1m/s |
| Max. working area | 17000m2 |
| Maximum mapping area | 40000m2 (430556ft²) |
| Gradeability | 12° |
| Brush pressure | 30-60kg (66-132lb) |
| Clean water tank | 150L (32gal) |
| Recovered water tank | 140L (30gal) |
| Battery capacity | 120Ah |
| Rated voltage | 48V |
| Charging time | 5h |
| Uptime | 4-7h |
Specifications as published by the manufacturer; confirmed against the datasheet at quotation.
The manufacturer has not published the sensor models, the IP rating, the noise level, the connectivity options, what is in the box, the dock or base station details, the battery chemistry or the mapping method; they are confirmed at quotation.
What makes the iScrubbot 300 different from a manual ride-on or walk-behind scrubber?
A manual machine depends on an operator for every meter of its route. The iScrubbot 300 turns that around. It maps the site, starts its task by itself, and returns to charge and to handle its water when it needs to. The manufacturer describes this as 7x24h unattended operation that effectively frees up labor.
That does not mean a person is shut out. The robot has a standing driving design and switches flexibly between automatic and manual mode. If a technician needs to move it across a loading bay or reposition it for a special job, manual mode is there for it. Automatic mode covers the repetitive routine.
The cleaning itself is also broader than plain scrubbing. Sweeping and washing happen together through the integrated brushes, and the machine lists sterilization and disinfection among its functions. In places such as hospitals or hotel lobbies, where hygiene is part of the brief, that combination reduces the number of separate passes.
How long does the iScrubbot 300 work between charges?
The manufacturer states an uptime of 4-7h and a charging time of 5h, from a 120Ah battery at a rated voltage of 48V. The range in uptime is wide because real work varies: brush pressure, floor type, and how much water is used all play a part. The brush pressure can be set between 30-60kg, so a lightly soiled terminal floor and a greasy factory aisle will not draw the same effort.
Water capacity is the other half of the endurance question. The clean water tank holds 150L (32gal) and the recovered water tank holds 140L (30gal). Because the robot adds and drains water automatically, a tank running low does not end the shift. It becomes a scheduled stop, much like charging.
For planning, the stated maximum productivity is 3600m2/h at a top speed of 1m/s, with a maximum working area of 17000m2 and a maximum mapping area of 40000m2. The cleaning width is 110cm (43in), and the machine can climb a gradient of 12°, which helps on ramps in car parks and loading areas.
Who is the iScrubbot 300 for?
The iScrubbot 300 suits operators of large hard-floor areas who want predictable cleaning without adding headcount. Facility managers at airports and stations will see the point of its width and unattended running. Owners of commercial complexes, hotels and office buildings can schedule it around opening hours. Hospitals and schools may value the sterilization and disinfection functions. Factories, industrial parks and large warehouses need to cover long aisles and wide bays, which is the kind of environment a machine of this size is designed for.
Cleaning contractors are another group. A robot that handles its own charging and water frees a crew to attend to detail work, and a contractor serving several large sites can match the machine to the area. If your floors are smaller or the job is different, the Cleaning Robots category shows other models in the range, and the Commercial Robots category covers the wider commercial line-up.
What is the iScrubbot 300 used for?
- Airport and station concourses. Wide, busy floors that need steady cleaning around passenger flow.
- Parking lots. Hard surfaces and ramps, within the stated gradeability of 12°.
- Commercial complexes, hotels and office buildings. Lobbies, atriums and corridors cleaned on a schedule.
- Hospitals and schools. Floors where the sterilization and disinfection functions are relevant.
- Industrial parks, factories and large warehouses. Long aisles and open bays covered without a dedicated operator.
- Exhibition centers. Large halls that need cleaning between events, working up to the stated mapping area.
Pricing and Availability
The iScrubbot 300 is supplied by quotation. Send us your site details and we will prepare an offer for your project. Delivery, customs and support are arranged with the quotation. The iTR iScrubbot 300 Commercial Floor Scrubber is available on this page.
Frequently Asked Questions
What floors is the iScrubbot 300 designed for?
It is designed for hard floor cleaning in large commercial and industrial scenes.
What cleaning functions does it offer?
The manufacturer lists scrubbing, dirt absorption, sterilization, ash reduction and disinfection. Sweeping and washing happen together through the integrated brushes.
Can it work without an operator?
Yes. It starts tasks, charges, adds water and drains water automatically, and is designed for 7x24h unattended operation. Manual mode is available when needed.
How large an area can it cover?
The maximum productivity is 3600m2/h, the maximum working area is 17000m2 and the maximum mapping area is 40000m2.
How is it kept safe around people?
It uses a multi-sensor fusion design with multi-dimensional environment perception to respond to dynamic and static obstacles. The sensor models themselves are confirmed at quotation.
Is maintenance complicated?
The manufacturer describes a system that needs no extra tools, with spare parts that are easy to maintain.
Where can I buy the iScrubbot 300 and what does it cost?
You can request it through this page. The cost depends on your project, so we prepare a quotation rather than a fixed figure.
Summary
The iScrubbot 300 answers a simple question: what if the scrubber ran the routine itself? With a 110cm cleaning width, integrated sweeping and washing brushes, large water tanks, automatic charging and water handling, and a list of functions that includes sterilization and disinfection, it is aimed at big hard-floor sites that clean every day. For a quotation matched to your site, this page is the starting point.


