FJD Vela Robotic Lawn Mower

Most robotic mowers ask you to prepare the lawn for the machine: bury a wire, set up a base station, then hope the layout never changes. The FJD Vela Robotic Lawn Mower turns that around by reading the yard itself, with LiDAR and an RGB vision sensor, and asking only that you place the charging dock and draw your lawn in the app.

The product is available through this page, by quotation.

Background

FJDYNAMICS and its mower family

FJDYNAMICS builds autonomous machines for grounds and turf work. Its range spans residential robotic mowers, golf course robots, sports field robots, commercial cleaning robots and a hard-surface line marking robot, with a digital platform alongside. The Vela sits at the residential end of that family, with the FR4000 and FV2000 close neighbors for larger or more demanding lawns.

That lineage matters to a buyer because the Vela is not a stand-alone gadget. It shares an engineering approach with machines made for professional turf: sensing first, mapping second, and as little site preparation as possible.

Positioning and key technology

The Vela is positioned as a way to get a better lawn without effort. Its positioning technology is LiDAR combined with an RGB vision sensor. The LiDAR builds a 3D map of the yard, which gives the mower clean paths, smooth navigation and an automatic return to the charger. The vision side lets it recognize grass and keep away from driveways, flower beds, bushes, play equipment and other non-lawn areas.

The boundary is a virtual wire. You draw it in the app, not in the soil. There is no physical wire and no RTK station to install, which is the main reason setup takes minutes and not a day of trenching.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the noise level, the cutting motor power, the charging station dimensions, the wheel and tire size, the anti-theft details, the box contents, the app compatibility or the rated input voltage; they are confirmed at quotation.

What makes the FJD Vela different from a wire-based robotic mower?

A wire-based mower follows a loop you laid out once. If you add a flower bed, move a play set or change the shape of the lawn, the wire has to change too. The Vela keeps its boundary in software. You map the lawn in the app, and the mower works from a 3D map of the yard built by LiDAR.

It also does not rely on an RTK station. Many precision-guided mowers need a fixed antenna with a clear view of the sky, which is one more piece of equipment to site and power. The Vela's LiDAR and vision fusion removes that requirement, so the only installation is the charging dock.

The mower also handles the awkward parts of a real property. It manages front yards, backyards, side yards and separate garden zones from the same app. High-grip tires and intelligent anti-slip control are fitted for wet grass, slopes and gravel paths, and it climbs slopes up to 65% (33°) while the cutting deck follows lawn contours to help protect the grass.

Day-to-day care is simple too. When rain is detected, the Vela halts the mowing task and returns to charge. When the blades need attention, you twist, release and replace them in seconds.

Which cutting height version should I choose?

The Vela comes in two versions, and the difference is the cutting height range. The Standard version cuts from 20 to 60 mm (0.8–2.4 in.). The High-cut version cuts from 40 to 80 mm (1.6–3.2 in.). The fact sheet shows no other difference between them, so the choice comes down to the grass you keep.

Choose the Standard version if you want a close, tidy finish. Choose the High-cut version if your turf grows best kept taller, as many warm-climate lawns do, or if you prefer to leave more leaf to shade the soil. Both share the 260 mm (10.2 in.) cutting width and the same slope rating.

Who is the FJD Vela for?

The Vela suits homeowners with a lawn that has a real shape: a front yard and a backyard, a side strip, a garden bed in the middle, perhaps a slope down to the road. It is also a fit for owners who do not want to dig, who rent their property, or who expect to redesign their garden and would rather redraw a boundary in the app than pull up a wire.

It is suited to properties up to the recommended mowing area of 4,000 m² (1 acre). Villas, guesthouses and small resort grounds with several separate lawns are natural candidates, since the app manages each zone.

If your needs go beyond that, look at the wider range under Mower Robots. The FJD FR4000 Robotic Lawn Mower and the FJD FV2000 Robotic Lawn Mower are the nearest siblings, and our team can compare them with the Vela for your site when you request a quotation.

What is the FJD Vela used for?

1. Routine residential mowing: keeps front yards, backyards and side yards cut on a schedule without your involvement.
2. Multi-zone properties: handles separate garden zones, each managed from the app.
3. Sloped lawns: works banks and grades that are tiring to mow by hand, up to 65% (33°).
4. Lawns with obstacles: steers around driveways, flower beds, bushes and play equipment.
5. Wet-weather care: pauses and returns to charge when rain is detected, then resumes service from the dock.
6. Gravel-edged gardens: keeps traction on wet grass and gravel paths thanks to high-grip tires and anti-slip control.

Pricing and Availability

We do not publish prices on this page. Quotation is how you buy the FJD Vela: tell us which version you want and where the machine will work, and we reply with a written offer. Delivery, customs and support are arranged with the quotation. To begin, request your quotation and the FJD Vela Robotic Lawn Mower is available on this page.

Frequently Asked Questions

Does the FJD Vela need a boundary wire?

No. It uses a virtual wire that you set in the app, so nothing is buried in the lawn. No RTK station is needed either.

How is the Vela set up?

You place the charging dock, map your lawn in the app and start mowing. The manufacturer describes this as a matter of minutes.

What happens when it rains?

The Vela halts the mowing task and returns to charge when rain is detected.

How steep a slope can it climb?

It climbs slopes up to 65% (33°), and its cutting deck follows the lawn contours to help protect the grass.

How large a lawn can it handle?

The recommended mowing area is 24 h max coverage of 4,000 m² (1 acre). It can also manage several separate zones from the app.

How do I change the blades?

Twist, release and replace them. The manufacturer says this takes seconds.

Where can I buy the FJD Vela Robotic Lawn Mower and what does it cost?

It is available through this page, by quotation. We do not list a price here; request a quotation and we will confirm the version, delivery and support terms.

Summary

The usual robotic mower makes you adapt the lawn to it. The FJD Vela adapts to the lawn. With LiDAR and RGB vision fusion, a virtual wire, no RTK station and a setup that starts with a charging dock and an app, it asks little of the property and handles slopes, wet grass, gravel paths and separate zones. Pick the Standard or the High-cut version for the grass you keep, and this page is the starting point.