Elephant Robotics Technology Myarm M750 (4011200003)

The letter in a model name rarely tells you much, but in the Elephant Robotics Technology Myarm M750 (4011200003) it says something about intent: the "M" stands for Master. This is a six-axis desktop arm built to take the lead role in a workspace, with a reach that covers a full bench and an end effector already in the box.

The product is available through this page, by quotation.

Background

Elephant Robotics and the myArm line

Elephant Robotics builds compact robot arms for education, research, prototyping and light automation. The range runs from small collaborative arms to larger desktop models, and it is sold in our Elephant collection. Within the broader Robot Arms category, the myArm family sits alongside models such as the Myarm 300 PI 2023, and it is paired with a companion controller, the myArm C650.

The fact sheet names two members of the family: the myArm M750, which is the arm described on this page, and the myArm C650, listed as its companion controller. You can look at the controller on its own page, Elephant Robotics Technology Myarm C650 (4011200002). Figures for the C650 are not given here, and none of the M750's figures should be read across to it.

Positioning and key technology

The myArm M750 is a versatile, intelligent 6 DOF robotic arm. Six degrees of freedom means the arm can position and orient its gripper in three-dimensional space, rather than only moving it along a plane. The arm has a reach of 750mm and a total span of 1500mm, which gives it room to serve a wide work area from one mounting point.

Its joints are driven by industrial-grade, high-precision digital servo motors. The rated payload is 500g, with up to 1kg as the maximum. A 1 DOF parallel end effector, in other words a gripper, comes with the arm, so it can pick and place objects without a separate tool purchase.

Beyond the arm itself, the M750 carries a few practical features: a 2 inch screen, a 5*5 LED light matrix at the Atom end, a Type-C USB connection and a 24V digital signal I/O. Together they make it easier to see what the arm is doing and to connect it to a computer and to external equipment.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the dimensions of the arm, the IP rating, the operating temperature, the operating noise level or the maximum joint speed; they are confirmed at quotation.

What does the "Master" in myArm M750 mean for the buyer?

The only thing stated about the name is that the "M" stands for Master. What a buyer can take from that is the way the arm is positioned within the myArm family: it is the main arm, and the myArm C650 is listed as its companion controller. If your plan involves a controller alongside the arm, it is worth raising the pairing when you request a quotation, so the two are specified together.

The more concrete reason to choose the M750 lies in the numbers on the table. A reach of 750mm and a total span of 1500mm describe a generous working envelope for a desktop arm. Repeatability of ±1mm describes how closely the arm returns to a taught position, while accuracy of 5 - 8mm describes how closely it reaches a commanded position. Anyone planning a task should keep that difference in mind. Repeated motions between taught points suit the arm well, while jobs that require absolute positioning to a fraction of a millimeter should be reviewed carefully.

The rated payload of 500g, with a 1kg maximum, places the arm in the category of light handling. It is a good match for small parts, sample containers, lightweight tools and teaching objects. It is not an arm for heavy loads, and we would rather say so plainly than let a project begin on the wrong assumption.

What comes with the arm, and how does it connect?

The arm arrives with its 1 DOF parallel gripper and a 24V 5A power adapter, one unit. Connection to a computer is through a Type-C USB port. For signals to and from other equipment, the arm offers a 24V digital signal I/O.

Two features are there for the person standing next to the arm. The 2 inch screen gives local feedback, and the 5*5 LED light matrix at the Atom end gives a visible indicator at the tip of the arm. Neither replaces a proper commissioning plan, but both are welcome in a classroom or laboratory where several people share a machine.

Who is the Myarm M750 for?

Universities, technical schools and training centers will find a 6 DOF arm with a built-in gripper a practical teaching platform. Students can work with real kinematics, real servo behavior and real I/O without the cost and safety burden of a large industrial robot.

Research and development teams can use it to prototype pick-and-place routines, test vision or control ideas and demonstrate a concept before committing to heavier hardware. Makers and small workshops with light handling tasks will appreciate the reach, provided their parts stay within the payload.

If your work calls for a different arm size or form factor, the same manufacturer offers alternatives. Our Elephant Robotics myCobot Pro 630 Robot Arm (4010200011) is listed on our site, and our team can compare it with the M750 against your task. Buyers who need a heavier payload than the M750's rated 500g should say so when they ask for a quotation.

What is the Myarm M750 used for?

1. Teaching robotics. A six-axis arm with a gripper lets students study kinematics and programming on real hardware.
2. Pick-and-place of light items. The 500g rated payload suits small parts and containers.
3. Prototype automation. Teams can test a workflow on a desktop arm before scaling it up.
4. Research experiments. The Type-C connection and digital I/O let the arm join a larger experimental setup.
5. Demonstrations and exhibitions. The LED matrix and screen make the arm's state easy to see for an audience.
6. Repeated motion tasks. With ±1mm repeatability, taught positions can be returned to consistently.

Pricing and Availability

We do not print prices on this page; quotation is the way to buy. Tell us your quantity, destination and intended use, and we will respond with a quotation tailored to your project. Delivery, customs and support are arranged together with the quotation, so you do not have to coordinate them separately. The Elephant Robotics Technology Myarm M750 (4011200003) is available on this page.

Frequently Asked Questions

What is the reach of the Myarm M750?

The reach is 750mm, and the total span is 1500mm.

How much can it carry?

The rated payload is 500g, with up to 1kg as the maximum.

Is a gripper included?

Yes. The arm comes with a 1 DOF parallel end effector, which is its gripper.

How precise is it?

Repeatability is ±1mm and accuracy is 5 - 8mm.

How do I connect it?

The arm connects by Type-C USB and offers a 24V digital signal I/O. A 24V 5A power adapter is in the box.

Which details are not listed on this page?

The arm's dimensions, IP rating, operating temperature, noise level and maximum joint speed are not listed here. Ask us about them when you request your quotation.

Where can I buy the Myarm M750 and what does it cost?

You can buy it through this page, by quotation. The cost depends on your quantity and destination, so send us a request and we will answer with a quotation.

Summary

The Myarm M750 earns its Master name with a reach of 750mm, a span of 1500mm and a six-axis build with a gripper included. It is a light-payload arm with ±1mm repeatability, aimed at teaching, research and prototype work rather than heavy handling. When you are ready to specify the arm, this page is the starting point.